-
I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...
gabagoo's latest activity
-
gabagoo replied to the thread Cyan issue...anybody have an idea why?.Was the capping station...new one installed and everything is back to normal...thanks for the help :) -
gabagoo replied to the thread Cyan issue...anybody have an idea why?.I have a tech coming in this morning to look it over. It is weird...the more I clean the worse it gets. I have a capping station on...
-
Posting a pic of the test print. One cyan channel is completely out. On Friday I ran a test and about half the nozzles were not firing...
-
-
Tell him the styrene will warp/melt/wrinkle and you won't be responsible. -
gabagoo replied to the thread How to deal with this.That is actually a pretty good idea, but it is the rear door of the trailer. -
gabagoo replied to the thread How to deal with this.The white is the original finish of the aluminum.... so not white, just a mill finish
-
gabagoo replied to the thread How to deal with this.I don't even think that would apply very well on a surface like that, although it would look 100% better
-
gabagoo replied to the thread How to deal with this.So basically the rear of the trailer is from what I can gather, raw aluminum or mill finish.... I think the everything around the old...
-
This is a pretty good customer of mine and recently they went through a name change of the company. They approached me to strip off the...
-
-
gabagoo replied to the thread Vinyl removal.My Wagner wallpaper steamer is a blessing. It may at times leave more glue residue on certain vinyls but rapid remover takes care of... -
gabagoo replied to the thread Weeding small labels.Are these printed / laminated and then die cut or just regular vinyl cut letters? If regular vinyl cut, then 3M makes a 775 series...
