I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes.
Click to Support Signs101 ...
We looked at the JV330 but with the only option for ink being 2 Liter "bags" we decided to go with the JV100 so far we are very happy with it. Also the wipers on the 330 are completely different than the past & when I went to look at the 330 I was told Mimaki was back ordered on wipers, I guess...
Ronny, I'm hoping I could still use the US inks on outdoor parking signs & coroplast signs as well as soft materials. Since warranty is out what are your thoughts about 3rd party inks?
Thank you, sorry for the delay I have been able to even mess with the software in about a week my trial us going to expire soon but my mother has been real sick ( life flighted & in ICU ) Thank god she is starting to get better so now I need to get back at figuring out the print & cut. It kinda...
Check out the Mimaki UJV 100 - 160 if you have room, I had a jv300 for 9 years and we recently replaced it with a 100, I looked at the 330 but I wasn't sure we would go through 2 liters of inkbefore they would expire. The 100 isn't as fast but the colors seem much smoother, we are running...
I purchased the 661 thinking we would be doing a lot of ADA Signage but that hasn't been the case so I'm 99% sure I want to switch to soft inks. Has anyone done this, or have started with soft inks? Do you regret running soft inks? Have you experienced any issues?
I typically don't use Corel for designing but I remember several years ago I had an older version of Corel & I was doing a landscape vehicle and I used corel to make an element of the logo I believe I used the pen tool and drew a line and was able to assign a clump of grass and it would place...
Do you set your contour cut lines in the design & then send both print & cut data to Print Factory or do you cut through design production mgr & print through Print Factory or pri t and cut through Print Factory?
Flexi has direct buttons to send print data to RasterLink, Vertelith, Onyx &...
Can anyone tell me their workflow when designing in Flexi or Signlab & printing through Print Factory? How much jumping between programs is there?
TIA
Gary
Pauly & Tim, thank you for your insight, I run Signlab & Flexi so I'll be using one of these. I'd love to learn Adobe but right now, we are just too busy to take the time to learn it.
I'm expecting a video call to show me Print Factory before I decide, I currently have 4 Rips. FLEXI, SIGNLAB...
The majority of our engraving is on LaserMax on our 100watt Thunder Laser. Air on LaserMax kills us, we use a 4" lens & turn the air COMPLETELY off when engraving on (about 8-12 psi) when cutting. We clean our lens often but we have been using the same lens for 3 years doing it this way. When...
I'm in the process of creating an indoor LED backlit (outer glow) laser cut acrylic sign. Typically I would just use a ribbon type LED strip on a job like this, but this job is a little different, and I'd like to use an LED rope.
I need to basically outline the antlers of a deer so I'd like to...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.