I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes.
Click to Support Signs101 ...
Hello everyone,
I'm David, a technician from Germany. I'm currently facing a challenge with a Mimaki JV150 printer that I hope someone here might be able to help with.
Here's the situation:
The printer was originally set up with an 8-color CMYK configuration.
I flushed all the lines manually...
Hey guys,
I have bought a cjv150 with a broken epl2 Board so i bought a new one.
It came with epl3 start up fw 1.06 which i upgraded to the newest 1.2.
After that i upgraded to the cjv300/cjv150 fw. 4.4 what worked.
The machine started as cjv300 and Shows a lot of errors because of thinking...
Hey!
I am an tecnichan usualy for Mimaki, Roland, Epson and Mutoh Solvent printers. Now i got an M64s for free from a client.
When i start the machine without any cardridge it tells me to Set LC INK CARTRIDGE, even if all cartridges are outside.
If i put them in the System Error 2804 appears...
Cheers guys,
i need to swicht back from Eco Sol Max 3 (ESL5) to Eco Sol Max 2 (ESL4).
Why? I am seller of MegaInk by Digital Ink Inks and buy broken printers and sell them again after refubish.
Digital Inks can´t offer the ESL5 to me because of reasons i can´t tell here:)
the machine was...
Hey all,
First of all i am quite experienced.
I only had the maintanance Manual from pro4 xr-640 and the menu is a bit Different.
I refrubished the machinę wirh two new Roland Heads and all service parts.
I calibrated everything possibile in sevice Mode head adjustment
And even the calibration...
Hey Ladys, hey Guys.
I have huge Problems to calibrate clients Soljet Pro4 XF-640
I did it with the Manual from Roland xr-640 but it is to different.
I always have side overlaps in Cyan.
Can someone Help and send me the Manual please?
tumatsch@googlemail.com or PN a lin.
You will get tons of...
Cheers guys,
i bought a cheap (now i know why) DX7 head which i still can send back.
Please check the pictures, the Mutoh is the old Printhead one and the other DX7 is the bought printhead
The DX7 has two connectors on each side and not four on each side as usual.
the connectors has 31pin...
Hey guys,
I have two JV33 with quite the same problem. I loose full or half nozzle-lines of a printhead.
what i have done already?
i controled the lines of licking air.
i changed all dampers
i adjusted the capping like it is shown in the JV33 manual.
i controled the damper-connection to the line...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.