Search results

I ran the FX for years before upgrading to the 7151. All those bells and whistles I have not even looked at.

The actual chip has been blacked out. But, it is the ds2431 chip. The software loads up the files and stored it on there, and I can check it after to confirm but when I load it into the printer it keeps coming up with the non IC error

Possibly. But since I'm already in the hole for $100 or so, may as well make it work

I've just purchased the ink emulator chips for my UJF 7151 plus and I'm having issues loading it to work correctly. I've been emailing the supplier and to the best of their abilities, they are trying to help work this. But... I'm still coming up short. Is anyone using this particular chip and...

Ok.... What's going on here??? I swapped my cyan with the clear head for the interm while I ponder purchasing a new head or 2.

Can anyone assit me? Recently my fletcher upright panel cutter is bending my panels. It's making it so I cant put them flat down on the flat bed without a bow or corner upturned..

The subtank itself is unable to be replaced withoutt replacing the entire head. The float wasn't stuck. As i mentioned that there was a blockage in the line. I found this out by breaking it down and checking each individual piece. Correct, having a stuck float could create these errors but in...

I rectified this as I found out the actual heatsink had blockages in there.

For anyone's reference when coming up with similar errors... I was receiving multiple errors relating to a particular head, in my case it was the black (Kay) head. Everything from overflow errors through to "!ink circulation", 68a, 68b and 68c errors. Now, this does not solve everything so don't...

It's a Sign Studio extension. Here's some info here. But odd that someone gave you that extension and not as a PDF or EPS etc. https://filext.com/file-extension/VE I've had 50/50 success rate oopening a cadlink file in illustrator.

thanks. so how do I manually release the valve? I'm trying to asertain where the blockage is for the Black channel and I cant pull ink through as it is locked.

whats the parameter or setting where I can open up the ink line solenoid to manually pull ink through? I can't find a setting under #test so I think it would be a parameter. I've also searched for something in the UCJV300 settings but I'm not coming up with anything

Yeah. If you got a copy.

So just multiple sub tank drains and ink fills with solution?

I there a way to manually pull ink through the lines? SImilar concept to the solvent roll to roll? I'm thinking there may be a blockage in the line for the black as I keep getting the Ink Supply error. Physically theres about a third a bottle of ink there, but the system says about 10%. I've...

Go on.....

Smoke_Jaguar did you have success in repairing the sub tank etc? I'm still getting the Overflow error on the K & white channels. THinking it's time to dive in but I don't wanna destroy it even more

Not sure if it was the cap top or the hoses I replaced from the cap top to the pump, but something worked.

Two steps forward....

Along way to go, but I'm getting there. So as per Neil's advice, I've found that the cap top isn't sealing 100% Seems in the front corner, magenta side, there's a slight gap. I'll try a new captop and see if that solves my issue