vector deer heads for rock blasting

[harrydodge]

I've got the vector art mega collection and I need some better art to blast in large rocks . Any body know where i can get some vector deer art. a lot of stuff that i have looked at has to much detail . I use a 175 cfm air compressor with a clemco pot been using 80 grit a/o at 80 psi seems to cut good but expensive .

[imaSIGNr]

You can take those same vectors and eliminate some of the detail,

[sandblast_dude]

I really don't... Sorry
www.stonewise.com is a cool site though for stone engraving ideas...
Hope it helps,

[imaSIGNr]

BeeLine animals has several....

[eaddesigns]

I've got the vector art mega collection and I need some better art to blast in large rocks . Any body know where i can get some vector deer art. a lot of stuff that i have looked at has to much detail . I use a 175 cfm air compressor with a clemco pot been using 80 grit a/o at 80 psi seems to cut good but expensive .


try these :-)



http://www.scmsysteminc.com/artwork_on_cdrom.tpl?OVRAW=big%20game%20vector%20a rt&OVKEY=vector%20art&OVMTC=advanced



http://www.ezart.com/shadows.htm

[zmatalucci]

You can use a more agressive glue on the rock as well as using a sharper media. Dupont starblast is fairly cheap, no reclamation needed(only good once) Then you can have fine detail. Also, if your using orange liner stencil for rock, it's way too thin.
Granite city tool has everything for stone work.