Vinyl by the Yard, foot

[craigco]

Didn't I see somewhere where you can buy vinyl by the yard? I need a little translucent vinyl in a couple of colors.

Anyone have any clue where i can purchase small amounts of trans vinyl?

Thanks,
Craig

[Rich]

Try www.graphitek.com They sell vinyl by the foot. Although there is a 10 ft. miminum.

[GXSignCo]

Fellers sells by the yard.

[dswanson]

alumapanel sells by the foot

[Pro Signs & Graphix]

Craig,

Accugraphics will sell partial rolls, or at least five yard rolls for sure.

http://accugraphic.com/index.html
CALL US:407-880-5774..|.. NATION WIDE:800-268-3672

[Flame]

www.pacifccoastsignsupply.com (http://www.pacifccoastsignsupply.com)


They sell by the yard, and I think it's just a 1yd. minimum.:wink:

[Kenny]

Fellers has most of there vinyl listed at 1yd, 10yd, and full roll prices.

[doublesky]

Signmart carries Oracal 8500 translucent by the yard, but only in specific colors and in 15" or 30" options.
www.sign-mart.com
714.532.7100

[craigco]

Great, Thanks for the info.

That will help.

Get this I need like 1 sq ft of one color
2 sq ft of another
and about 1 yard of another.

and this is a 5x10' Plyon Face. :design: Nah, it's not that bad.

It's a local Bank Branch, so it would be great to get what they want without costing me the extra. Will be a good account if I can secure it.

I will check with these suppliers,

Thanks again,
Craig

[Pro Signs & Graphix]

Craig,

Considering this could be a good account, it would be foolish to nickel and dime the materials. Buy what you need and charge for it. If it more than you need, so be it, you still charge for it. If you short-change yourself on the materials due to a goof, you drastically lessen the chances of securing the customer.

[Mike Paul]

Vinyl Sign Supply also. (PA)

[craigco]

I agree with you. But, one piece i need is 3.5" x 1.3" (two of these) and another is 8x10"(2 of these). So just doesn't make much sense to buy 10 yards if i don't have to.

I don't foresee a bunch of baklit signs going up for them.

[craigco]

Ended up getting it through Fellers.

Thanks for the replys. It's good to have a source of suppliers