Mutoh Parts

[Cy Fan]

I don't know how common this is but it seems that I keep breaking the plastic flanges on the feed reel of my Falcon Outdoor.

I was wondering if others were having this problem and where you order replacements. I called GEI Calgraph but they wanted my first born child for one of them. and I tried to super glue them back together with no luck. Any ideas?:thankyou:

[Compilla]

Try CMYKparts.com

Get the heavy duty flanges

Part# ZMY-46040

[Steve C.]

I didn't see any flanges there.
Here's the cheap way out. Mine brook the first week and I can't remember
what they wanted for them, but it was outragious.
This is a bad photo, but these are the spools that come in some vinyl rolls and
ap tape. they are just a tad too small to fit over the poll, so, I cut away the
ribs around the center hole, then made 4 cuts at 90 degrees apart around the
center cylinder. It will spread just enough to hold pretty tight to the poll. Only
problem is you have to manually line up the edge of your media with the hole
in the pole where the leading flange fits.

[Jackpine]

When I got my Mutoh from SSK the Falcon Jr's were shipped with lighter weight flanges. Mine broke within 3 months. I taped them, glued them and nothing worked very long. Mutoh knew about this problem as I was told by SSK techs and sales staff. At the time, Mutoh was replacing them at NO CHARGE, if you can believe that, for printers still in warranty. I got a replacement set from Mutoh with the help from the Tech Guys at SSK. The heavier duty flanges were shipped with the 48" and larger printers. Try Mutoh direct or www.cmykparts.com. I don't know how common this is but it seems that I keep breaking the plastic flanges on the feed reel of my Falcon Outdoor.

I was wondering if others were having this problem and where you order replacements. I called GEI Calgraph but they wanted my first born child for one of them. and I tried to super glue them back together with no luck. Any ideas?:thankyou:

[Compilla]

I didn't see any flanges there.
.

Try to call them

[Cy Fan]

I didn't see the flanges on the CMYKparts website. Do you have to call them to order it?

[Jackpine]

1-800-482-7560, call them. They will help.

[Cy Fan]

I called them and they said they didn't have them, and refered me to GEI

[Cy Fan]

does $87 seem about right for one of those heavy duty ones. That seems a little high for a little piece of plastic to me, but what do I know.

[Graphics2u]

I called them and they said they didn't have them, and refered me to GEI

Call mutoh direct and see if they will sell them to you. They ain't cheap though. Seems like they were about 75 -100 bucks a pair when I got them.

[Graphics2u]

does $87 seem about right for one of those heavy duty ones. That seems a little high for a little piece of plastic to me, but what do I know.

Sounds about like what I remember. It's robbery!

[Lunatic Taskbar]

ouch were in the wrong business. need to start making Flanges!!!!!