Versaworks profiles?

[landdesigns]

How do I add ICC profiles into Versaworks, I can't seem to figure it out.Tried a Oracal profile but wouldn't work?

Todd

[Kenny]

Under Versaworks:
Select the Media tab
In the Media Explorer window, Select the folder looking icon to Load From File"
After you have loaded the profile, make sure the checkbox next to is is checked so that it will be visible in the Media Type window under Job Settings.

Hope this helps.

[landdesigns]

Opened Versaworks, opened media explorer,opened "load from file", file opened( rml.),Versacamm program tells me"This media file can only be opened in Versacamm series printer, it is now set to Versacamm VP series".

I down loaded a few profiles and they all won't work, do I need profiles for the VP series only and where do I get them?


File I tried to load - VCammSP300v_VWorks_MAX_Orajet3951G_720.rml

own vp-300 Versacamm

?

[landdesigns]

nobody?

[javila]

You need profiles for your specific printer.

From your posts I'll assume you have a VP and your trying to load SP profiles to it.

From:
http://www.oracal.com/knowledge/icc-profiles.asp

720 Profile for 30" VP :
http://www.oracal.com/icc/Roland_VersaCamm_VP300/versaWorks/VCammVP300_VWorks_Orajet3951G_MAX_720.zip