Desay master xy 340

[bigjuicyfruit1]

I just received a Master xy 340 cutter which is a couple of years old I assume I am trying to get it to work but no luck. I need a driver and some software just to do small vinyl lables. Can anyone help?:help:

[Air Art Girl]

sorry.............hopefully you didn't lose....I mean pay too much

[Techman]

goto the makers website and get it all there..

[mark-s]

Probably need "winsign" program.
mark-s

[49hd]

Call desay he'll send you the drivers. You will need to buy the rs232 cord, I believe it is or try a modem adapter. Once you get it going you'll want to dump it like I did.

[raw191]

I've had one for a year now and love it. I also have a Roland camm cutter and I have to say, Master has some things on it that I like better than the Roland as far as convenience stuff.

[Techman]

I also have a Roland camm cutter and I have to say, Master has some things on it that I like better than the Roland as far as convenience stuff.

HUH????

[OldPaint]

I've had one for a year now and love it. I also have a Roland camm cutter and I have to say, Master has some things on it that I like better than the Roland as far as convenience stuff.
HAHAHAHAHAHAHHAAHAHAHAHAHAHAHAHAHAAAAAA
owner of a ROLAND CX-300 I AM)))))

[cOrKinSA]

small vinyl lables
Heh heh.

[bigjuicyfruit1]

Thank you. I have the RS232 cable and a null cable. Is there any software out there that is shareware. Just want to make sure it works. Thank you.

[49hd]

Try this link http://www.signgo.com/download/index.html

[cOrKinSA]

I commend you for trying to get this (hobby?) up and running but do you really know what your getting into?
If you must, right down below this page is a Merchant Member that can help you.
http://www.signs101.com/forums/images/SL8_signs101.200x40.gif (http://www.cadlink.com/products/signLab/sl_trial_demo.php?utm_source=signs101&utm_medium=banner&utm_content=SL8&utm_campaign=signlab)

[cOrKinSA]

Oh and what's your get up?
Who are you?
Why are you doing this?
Where do you come from?
What made you decide to do this?
Blah blah blah....