aspire software to gerber 408 cnc?

[ksc]

Any one using aspire cnc software, will it work with gerber 408 router

Thanks ksc....:Big Laugh

[CharliefromTechno]

The guys at Aspire are very helpful, just give them a call. They most likely already have a Gerber post, or will be more than happy to generate one.

[james mcgrew]

the gerber is not so easy as they are married to thier own artpath software, i have tried to help some other owners without success and one has had to change controllers, i understand some of the newer ones might be able to do this

http://www.vectric.com/forum/viewtopic.php?f=27&t=5230&hilit=gerber

jim

[Matt-Tastic]

if the software can output Gcode, you can use it with the Gerber Sabre. other than that, i'd check with the software manufacturer to see if the Sabre is supported by them.

Gerber will tell you to use artpath.

[james mcgrew]

having attempted to help other gerber owners with this i have found that gerber is propietary and does not play well with others. in the meantime aspire is one heck of a piece of software, best to download the software working demo and test the sample files before purchasing

jim

[james mcgrew]

fyi

http://www.vectric.com/forum/viewtopic.php?f=27&t=6786

[Dropout]

I know this is a little old, but if anyone needs the "official" Gerber document on G-codes, drop me a PM.