Problem with FasTrack 550

[RaGaEy]

hey guys.. anyone help me out fast plzz

i have gerber fastrack550 and i face a problem.. when i make power on all the lids are flashing continuesly, then when i push enter, only lids number 1, 4 and 6 still on....

i dont have the manual now, and i hope some one can tell me what does that mean

THNXXXX IN ADVANCE

[Tom Hobeck]

The code you said is EEPROM ERROR & few parameter esc.
Not enough ESC-parameters. Check the communication settings.
select user defined. in setup sheet they can be found in lines 8-16