PDA

View Full Version : Versacamm

mrmoto95
03-21-2006, 10:29 PM
Hello, anyone here use a versacamm? Waht kind of maintenance have you had, cost of inks, basicly is it a good machine. Thanks in advance.
Barry
03-21-2006, 11:03 PM
Its a great machine, you can see the maintenance you need to do by clicking the below link:

http://printingdigital.net/forums/how-articles/202-how-clean-your-versacamm.html

OEM inks run about 30 cents a sq foot.
mreffex
03-27-2006, 10:05 PM
Great machine but it only has 2 print heads which makes it slow. easy to load, great profiles with the versaworks rip software. we have a 54" machine, our tech support is great from our local company Innowave Sollutions, Charleston, SC.
southpawP8NTR
03-27-2006, 10:36 PM
Got mine last week...Love the machine and the rip
gtjet
03-27-2006, 11:22 PM
Can not imagine how we got along before we had it, actually on printing we did not really get along well at till we got our Versa Camm SP 300, wish I had sprung for the 540 now.
tdgraphics
04-09-2006, 03:10 PM
Hi,

We have been running our SP540 V for the past year and the only issue we had was a Scan Motor Error, which turned out to be some dust or something on the scanning strip.

Running costs are inexpensive and the quality is spot on when using the correct profiles for the materials.

Neil
2NinerNiner2
04-09-2006, 06:32 PM
Same as 'gtjet' ...wish I would have waited a month and got the 540! Love my SP-300, not a moments trouble in a year and a half.
GregT
04-09-2006, 06:44 PM
I have had my 300v for a year now. Great machine when working. We have had the pump, circuit board, dampers and one other thing (I forget what it was) replaced. The tech support is good thru the company I purchased it from. (VSS) I to wish that I had sprung for the 540v. That may still come ;)
txsurfer
04-09-2006, 08:19 PM
540V for 8 mths and love it!!! It has not stopped running yet, the business for me seemed to follow?
threeputt
04-10-2006, 12:33 PM
Yes, the 540 machine is excellent. I can't imagine how we did without it, like a previous poster said. We run tons of vinyl through it. Running banners is as close to printing money as you can get. Get yourself a grommet machine, run 13oz material and bam! Instant money.

Had it 6 months or so. No issues yet. Hard working machine. You do have to load the proper ICC profiles, though. After that you're good to go.