Arizona 180 problem.. need some help

[WB]

we recently purchased a used arizona 180. I have a 90 it's in very good shape 2 years old.. only about 10,000' have been through the printer..

this new(used) 180 has 65,500' through it and ahs been modistly taken care of IMO.. Today I took on the task of getting the 180 up and running in our shop for the 1st time.. everything went well.. Except!! I keep getting a "check Heater/Blower fuses" error

when I 1st turned on the printed I noticed it was very quite.. but I wasn't sure why.. later on I realized the blowers are not coming on. I also noticed that the heater is coming upto temperature but it's staying at the set temp.. it keeps raising up and up.. untl I get the error...

I've checked the connection on the blowers.. I've replaced the fuses with new ones.. still nothing..

any help would be great

Thanks

[skyhigh]

I know nothing about these machines, but it sounds like a thermostat problem. Would the blowers kick on when a certain temp is reached, or are they supposed to be on constantly?

[signage]

Have you pulled the fan and see if it works? The voltage rating should be marked on it. I don't know about these machines but I would start looking at the obvious.

[WB]

just an update,,, narrowed it down ,, one of the blower fans was siezed up thats why it kept blowing fuses..

[Cadmn]

that'll do it ever time :)goodluck