• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Recent content by Adam Wilson

  1. Need Help Roland PC-600 Issue

    I have a roland PC-600 Colour Camm Pro which has been working perfectly today. When printing it jammed and since turning off and back on it doesn't print foils anymore. It prints as normal but when i check, it is not transferring the ribbon to the vinyl? Anyone have a fix for this? I ahev a...
  2. Need Help Mimaki CJV-150 dripping yellow ink onto media

    I can see the orange looks like its' going to burst so guess i replace all 4?
  3. Need Help Mimaki CJV-150 dripping yellow ink onto media

    Here's an image of what's happending. Nozzle seems to be dripping yellow. Can anyone help? Many thanks
  4. Need Help Mimaki CJV-150 dripping yellow ink onto media

    Hello. Recently my CJV has been dripping yellow ink onto media. I did some head cleaning and can see yellow ink droplet builing up on the print head itself. Is this a damper issue? Test print is perfect and head is only 2-3 years old? Its started to turn some of my prints more yellow. Was...
  5. Need Help What ICC profile for Metamark Banner printing

    I did, apparently the banners they supply are from a third party source and they dont offer any profiles for it. Although I did print using MD5 Matt PVC profile with fairly good results in the end.
  6. Need Help What ICC profile for Metamark Banner printing

    Hello, does anyone know what ICC colour profile to use for banner printing on a Mimaki CJV150-75 CMYK, Lk, Or?
  7. Mimaki CJV150 printing grainy/faded

    The thing is we have used this media for a while and always prints fine. It's not like it's a new faulty roll, we are half way through it. I've taken some more images. Nozzle is printing fine, but all colours are printing bad. Also these are all eps vector files so quality is normally pefect.
  8. Mimaki CJV150 printing grainy/faded

    Most of the designs we print are small so we don't mind how long it takes to print. Nozzle test has come back all fine which is what is confusing me.
  9. Mimaki CJV150 printing grainy/faded

    Just seems odd that i've used this roll of vinyl for quite a few weeks perfectly. Perhaps the heat has affected it then? I'll re-try today.
  10. Mimaki CJV150 printing grainy/faded

    We use Metamark MDC using their profiles are sometimes 3M profiles. Always 720x1440 and 34 passes and uni directional. We've always used this media with no issues so seems odd to me. Could be it a temperature problem due to how hot it's been here the past few days? I've just changed the halftone...
  11. Mimaki CJV150 printing grainy/faded

    I have a Mimaki CJV150 which had a new printhead installed last year. Has been working fine up to about a week ago. The Test print shows that all nozzles are perfectly fine but the print comes out very grainy. Has anyone got any tips?
  12. Roland PC-600 won't change cartridges when printing

    Hello i'm wondering if anyone can help me. I have a Roland PC-600 Colour Camm Pro that recently won't change over to the next cartridge when printing multiple colours. i.e. it goes to print red first but then when it's time to print blue or gold after, it doesn't put the red back but instead...
  13. Need Help SYSTEM HALT (*)406 : WIPER ORG - Mimaki CJV150

    Hi there, I keep getting this error message. I've cleaned all around the wiper blade and part it slides on and even greased it but still getting this message. Does anyone have any tips or should I just get it serviced?
  14. Mimaki UCJV150 Printer / Cutter

    Hi all, I currently have a Mimaki CJV150 solvent printer. Ink Configuration is CMYK Lb Or Si Wh. We run a small vinyl transfer printing business and the printer doesn't get used every single day. Usually about 4 days a week. Because we run the business from home, we have to turn the printer off...
  15. Question Mimaki CJV150 extended warranty/care package?

    Thanks for the responses. The gold package does cover on all parts including the printhead which is about £2000 alone. But they are asking for nearly £2000 a year including VAT for this warranty. The silver package covers labour and parts charged at 25% discount with slightly less call-out...
Top