I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes.
Click to Support Signs101 ...
Are you sure that anything is missing? I would say that the shaft should be locked somehow to prevent such situations. Some Seeger ring? And what did you use to make these photos???
In the case of the GT version (small table) de-installation and installation are not a big problem - the most important part is to prepare the printer for shipment (lock the carriage to the gantry, gantry to the table and remove fluids from the printer). Skilled service engineer will need a few...
Sprawdź płytkę zczytującą RFID z worków, być może ona gubi zasilanie albo po prostu czytnik na tym kanale jest uszkodzony. Być może też odległość między płytką a opakowaniem jest zbyt duża, czy jak dociskasz płytkę, system wykrywa opakowanie? Próbowałeś zamieniać miejscami płytki czytników...
During the initialization printer moves the gantry a little bit. Is this movement visible? Can you move the gantry using the command from the SDS menu? If you switch off the printer completely, then move the gantry somewhere from the home position, will it return to the home during the...
You need to check everything related to the gantry movement. First question - when you restart the machine, the initialization is correct? Do you have any errors during this process? Does the gantry move during the initialization?
Swap this M head with another one from the same channel, you'll see if it's a problem with the head (if the problem moves together with the head) or somewhere above - flat cable, board etc.
When did you replace the white ink filter (capsule) for the last time? Can you hear the white ink pump? When did you replace the white filters in the carriage (small discs)? Do you see a black powder around the ink pumps?
Check items from the list on the picture:
- is it possible to move the carriage and gantry manually? What are the readings on the carriage and gantry encoder read heads (colour of the LED - green/yellow/red)
- is the drawer closed (and the sensor is working)?
- are all the buttons released?
-...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.