Recent content by BigBoyMs

Ok, thank you. I will try that!

Hello, we have a VJ1624 that prints good, except right around the 48" mark on wide prints. It is fine anything under 48 inches. If you print 54 or 60" prints it has a very thin line at that mark all the way down the print. Almost like something was dragged across the print when it was still wet.

Have you been happy with the VJ1324? I 2as thinking about buying one of those from Sign warehouse.

Hello, I was just asking the same question. I was looking at buying that printer from sign warehouse. Did you buy it?

Thanks for the info!

Hello, thanks for any help! I am in the market to buy a new printer. I have a Mutoh VJ1204 which is 48" and I am looking in to purchasing a new one. I am looking at 54" or bigger depending on the price. I bought my last one from Signwarehouse and they have the Mutoh VJ1324x which is right around...

I replaced the dampers and got the green out of they yellow and I printed a wrap that night. When I went up the next day, one of the yellows lines was green again. I put a new cartridge in when I replaced the dampers, so it was not the cartridge. I flushed and flushed and cleaned the lines and...

I never have replaced the dampers. I ordered them yesterday. I will look at everything and make sure there us no ink build up. Thanks for the information!

Vj1204 mutoh

The ink cartridge is all the way in.

Yellow is fine at first after running a cleaning. Then has blue or green lines in it. I am trying to print 100% yellow. I printed 4 blocks of 100% black yellow magenta and cyan. All looked good yellow started getting lines in it. When I sucked some of the yellow out of the dampers, it had no...

Yeah, that may be some of the problem. I am not sure how it all works. I took one of my yellow dampers off that had some blue ink in it off and was trying to figure out how to flush the damper. I did not clamp it off or anything. How do those 2 lines work going to the print head for each color...

My damper has blue in it. Do I just let it pull it through?

Hello, I have a small racecar wrap company in Oklahoma. I have been getting lines in my black and it has been banding a little more and more. Last week, I did a nozzle test and a lot of my Black jets were missing. I did a couple of head soaks that were an hour long each, and nothing got any...