I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes.
Click to Support Signs101 ...
Hi everyone,
We have a client looking to update their door sign. The client would like plexi-glass substrate. Who is a good supplier for these.
I have attached an example of what we are in need of.
Thanks
Brad
I have a customer that recently purchased a dump truck. Other than the doors, he would like his company name on the mud flaps. I told him I was not sure about and would hunt around. Any suggestions?
Thanks
Brad
I am working with 3M 7725 frosted vinyl. I am having an issue with the pre-mask not lifting the vinyl away from the backing material. I am using R-tape 4075.
I did a center hinge method and removed the backing paper from the vinyl. I did this at 180 degree method.
Hopefully someone has advice...
I have a client looking for me to supply them with some static clings. The client is going will be using them as temporary numbers on a street drive race car. When they get to the track they will apply them to the inside of the windows.
Any suggestions on a good source. I am hoping to do white...
I have a customer looking for a run of 2500 decals to start. His only request they be masked. Does anyone have a recommendation on a company for a project like this. I have not priced it locally yet.
Thanks
Brad
We just did a trailer for a local trucking company. It is our first time doing a trailer like this. Just curious people's thoughts on pricing. The company logo is roughly 24 tall by 96 wide and the tag line with graphics is roughly 13 by 96. Thanks for your help and comments.
As I mentioned in an earlier post. The cutting head was moving front to rear, I noticed there was two 4mm holes in the side of the cutting head. I did was make a plastic bushing to hold the head out and stop the movement. Put the fix in and did a perfect test cut.
Brad
Looking the cutter over tonight. I noticed the cutting head seems to have a lot of extra movement. When I compare it to my smaller plotter I can take the cutter head move it front to back about a quarter inch.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.