Recent content by Chichia96

But then it’s facing the wrong way… as far as I know you can’t print on the sticky side of window film

Hi everybody, We have a job we accepted to install window film on the front windows of a business. In front of the 72” tall windows that are about 2-3 feet off the ground is a bunch of large boulders (see pics). Obviously we can’t stabilize a ladder on those and there isn’t a good spot for a...

I’ve had this EXACT issue! Turned out that I static shocked it one too many times by not grounding myself before I went on to touch the buttons. The solution was to replace the main board. My graphtec was under warranty so it was covered but we had to replace it ourselves which wasn’t crazy...

This is my result, any thoughts?

You need to right click on your printer up in the printers panel (top of onyx screen) and hit configure, then in the window that pops up there's a quick set a tab and you can edit, Add new, or delete a quick set. You should edit all of the quick sets to auto rotate by going into the believe it's...

Laminated white print media (Arlon/briteline/3m) really anything 3mm thick laminated with 2-3mm lam: Blade: 60 degree Speed: 20 Force: 31 Laminated reflective print media: Blade: 60 degree Speed: 20 Force: 33

Your quickset could have an auto sizing rule too. Check that out as well.

Thank you all so much for the input, all of it was quite helpful and even more entertaining. Defs gave me some insight and ammo to bring to my boss when I try to convince her to let me throw it all away You just KNOW if she finds it in the dumpster without a discussion beforehand there will be...

Yeah… I kinda inherited a signs department that was run by a very frugal / financially cautious boomer and the new owner doesn’t want me throwing away what they kept over the years ‘just in case’ () so I’m kinda stuck with this mess of decals that are usually only 1 of 1 or 2 of its kind...

Hey all. We have a constant issue with how to best store our overprints of decals in a way that doesn’t damage them over time and is easy to sift through to find when a re-order comes in and we have to search for the over print from the last order. See attached photos for our current situation...

This looks fantastic! Thank you! What if they need it to be magnetic?

Quite frequently we have a customer who orders dry erase boards with custom full color, graphics on them. Normally they get the white quartet boards so we can just print the graphics on a white media, laminate with dry erase lam and apply that to the boards but recently they have been requesting...

Update for everybody also struggling with this issue, creating a quick set that had ‘allow rotation while nesting’ under the output tab worked!! Thank you so much!!

Sorry, what is OMAS?