• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Recent content by Indecisive

  1. Onyx/Summa barcode help

    This solved my problem. Thank you so much!

  2. Onyx/Summa barcode help

    This solved my problem. Thank you so much!

  3. Onyx/Summa barcode help

    This solved my problem. Thank you so much!

  4. Avery MPI 1105

    Ok will do. Thank you!

  5. Avery MPI 1105

    I have a customer that wants his tree stump grinder wrapped so I’ve been doing some research on how to do wraps. I have Avery MPI 1105 vinyl and also have Avery DOL 1060z laminate that I plan to use. Is the laminate necessary to use with 1105 vinyl? Thanks

  6. Onyx/Summa barcode help

    I’ll check that out. Thank you so much!

  7. Onyx/Summa barcode help

    I wonder if that would solve the problem, wouldn't hurt to download it anyway.

  8. Onyx/Summa barcode help

    I'm not there at the moment but i know it's the last version before the most recent update. I need to update to the latest one.

  9. Onyx/Summa barcode help

    I've actually been trying to use the Onyx Cut Server but i've run into a problem where the files are not populating on the Cut Server for some reason. I'll press print, it'll flash on the Cut Server and then just disappear. I'd like to just bypass the whole GoSign if I can.

  10. Onyx/Summa barcode help

    I don't think this is possible but thought i would ask. Let's say you print a sheet of decals with a barcode but accidently forgot to change the setting from kiss cut to thru cut on Gosign. So now i have 2 kiss cuts. One that goes directly around the design and the other that's about 1/4 of...

  11. Summa S2 Issues

    I finally got it figured out. I just had to download the SCC again and use the Epson barcode instead of Summa’s. I really appreciate everyone’s help!

  12. Summa S2 Issues

    Phil, The cutter is powered on and the SCC is running. I have windows 11, Summa GoSign 2.4.1.4

  13. Summa S2 Issues

    I've made sure the SCC is running and the USB is connected. Still receiving the same "waiting for camera control" message. Any recommendations would be greatly appreciated.

  14. Summa S2 Issues

    I had a feeling it was something simple. I’ll give that a try and I really do appreciate the help! I’ll update you on the outcome, thanks.

  15. Summa S2 Issues

    I’ll have to get back with you on details because the tech rep was doing the set up when we ran into these issues. We should hear back from him on Monday. We initially had only the Ethernet cable connected and then tried using the usb but it didn’t change anything. I guess the older models...
See more
Top