I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes.
Click to Support Signs101 ...
I can’t recall exactly and had to look back through some messages and invoices. It seems we ended up going into the BIOS and got lucky. According to my notes, we were double checking BIOS settings and thought we did not change anything. However, it's important to note we did save and exit BIOS...
We've never had to go this high on feed adjustments and thought this was odd as well. We've had to go as high as 1200 to get this to adjust properly.
From what we've seen there very few people with any experience on this particular model - even within Mimaki.
This model has 3 separate motors...
Interesting. I never imagined voltage could be a factor. As stated in OP, I have my doubts it is a head deflection but I'll have our operators take a look as suggested. Thanks.
Sorry for reviving an old thread but did you ever find a solution to this? Our UJV55-320 has X-Axis registration all over the place immediately after successfully calibrating feed comp.
Major print registration issues on our Mimaki UJV55-320. Affecting all colors and consistently bad from start to finish within a print session. Y-Axis registration seems to be fine. We've had techs stop by earlier today and they are saying that heads are deflected. I question that as there have...
We recently upgraded one of our printers and logged into Caldera workspace to reassign the license/print driver assignment accordingly. Low and behold, the option is greyed out and says to contact our Caldera reseller. Upon doing so, we got the following response:
"They will need to upgrade...
I saw your post from a couple years back looking for flatbed recommendations. We're in the same spot now and are looking at some of the same units - digitech, vanguard.
What did you guys end up going with? Are you happy with it after 2 years?
Great points to consider. The reason we're considering 2x cheaper units is for redundancy. Being a quick turn shop, we don't have the luxury of buying out when equipment goes down.
That Arizona 6100 series looks amazing. Any idea what the starting price is on those units?
Looking for some recommendations on which direction we should go for our next purchase. We are replacing 2x aging hybrid UV printers and are looking to increase throughput.
Daily volume/jobs:
- 90% 4x8 4mm boards - mainly corrugated, foam, pvc
- 30-40 4x8 impressions/day with the occasional...
Reviving this old thread to add some information for anyone looking for it.
We are now on our 4th Y motor on this machine...looks like they are failing after 1-1.5 years (780 - 1170 hours). Anyone else with experience on this machine think this is abnormally low?
Our FB500 seems to be stuck in a bootloop due to an error during initialization.
Screen will show "Initializing 48% - 75E4-B" then error out with error code "E-MD-9 Motor driver board initialization failed".
Next logical step is to obviously replace the motor driver board, but error codes are...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.