Recent content by M@CK

I have other plugins by them, but the nesting plugin look promising. https://www.o2creative.co.nz/Nesting_PowerScript_Plugin_Extension_for_Adobe_Illustrator.php https://www.youtube.com/@o2creative427/videos

Anyone got any knowledge of this platform ? Looks very interesting for my kind of work, imposing shape of all kind and quoting them at the same time. here are some relevant links: https://insoftautomation.com/large-format-imposition/ I would love to get more feedback from end users.

Yeah just got off the phone with Kongsberg, they got me to do some testing and since everything else works its probably a bad board specific to the IBAG that sends the signal to the relay to stay on :( So yeah no easy fix unfortunately. Thanks a million BigNate !

Hey BigNate, Thanks for answering ! Here's the info I get : Info: Could not connect to LUST inverter. Info: IBAG Init error. Info: SendTolIBAG busy 0 NewStat 2 PrevNewState 1 InputState 1 IBAG_IDLE Info: Info: uchIBAG_InputState 2,IBAG_CONNECT Regards !

Kongsberg iXL Critical Machine warning 3020, Got this error today while starting a routing job now the router wont start anymore, help would be greatly appreciated. Regards

Thanks InkJetsetter, I will verify that.

Yeah, I saw that also, but I just imagine the Password could be coded in the software to be used by it and if I modify the password, I can cause VUI to be disabled by mistake. Then I would need to get a tech on site to rebuild the PC, not an ideal outcome. Thanks for the help !

Hahahahahaha Should have tried that, unfortunately no :(

Hey Maxz3241, I did contact the original tech, and he wont give me that password for "reasons", I shit you not, cant be more vague than that... Here is the window requesting the password I'm talking about. Tried both vutek01 and admin, and all their variants.

I'm looking for the keychain password for my DFE, EFI won't give it to me because, reasons ... I only want to use it for the Remote Desktop feature in the DFE. And no, it's not vute01. Help appreciated.

I ordered that Anti-Static Spray ill give it a shot even if I doubt that my issue is caused by static. Thanks for the suggestions !

Using sheets, I have 40% humidity at the moment and Ionizing Bar at the feed, not sure theirs more I can do about that. I was thinking of replacing my Yellow head dampers on a fluke that might be it ... just seems like a waste if its not it.

Hey Maxz3241, So Multipass high @ 600x360 is viable, I would still like to get to the bottom of this. I used to print in Multipass Standard @ 600x360 for twice the speed, any recommendation appreciated.

Hey Maxz3241, I'll try that later, throughout time for Multipass Standard @ 600x360 is 3 min for a 4x8 throughout time for Multipass high @ 600x360 is 7 min for a 4x8 and throughout time for Multipass Standard @ 1000dpi its 8:30 min for a 4x8, so I would save about 50 minute, not bad. Good...

Hey Dasdesignguy, Tried it and if anything its worst. At a 1000dpi its perfect. So I guest I have to print this way until I can fix it. More recommendation welcomed Thanks for Help!