I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes.
Click to Support Signs101 ...
When I first started my shop, I bit the bullet and bought a $60,000 Multicam 1000 series 5x10 with 8 tool changer. Lease payments were roughly $1200.00 per month for 5 years with $0.00 buyout. I have never regretted the purchase even though we sold the machine after 7 years and upgraded to...
We've never had any issues on were are on our 3rd Roland machine. Started with sp-300, upgraded to XC-540, Now running an XR-640. Every machine we ran was still in great condition when we sold it. I hope you get to the bottom of your issues.
Not surprised. They were a nightmare to deal with from day 1. Sent printheads in for service, they lost them and never replaced. Tons of crap like this across the board.
I designed and built them myself. It was a fun project. As for the inks, a wash and dry on high heat takes care of that. Ive been wearing those shirts for years with no issues.
I beg to differ. While not the ideal situation, it does work and I have shirts printed on mine that have worn better than direct print. The key to laying the fibers down is pressing them before you print or using dri fit shirts that don't have fibers.
I spent a few days with Bob at his shop a few years ago when vacationing in the Tampa area. Bob invited me out to his shop and we spent the day training his staff on faux finishing techniques. Bob took me out to lunch and later that day we went and played a few games of billiards back at...
this is a terrible idea..... use a product that is lightweight and designed for the stand. We have had great luck with Fellers brand Pop Up material. even 13oz is too heavy and looks like crap in a stand.
The results are in. The Sign Invitational 2017 was a huge success! | The Sign Invitational
Here is the link to the pics for this year's sign invitational.
Please consider entering next year! A great time was had by all!!!
ISA Expo is March 22-24, 2018 Orlando Florida.
The entire project was cut from 1/2" cast clear acrylic. We used a .375 2 flute plexi bit from Onsrud for the rough pass and a .375 polishing but for the finish pass. The spacers between each section were recessed into each 1/2" rib 1/4" deep. We used weld on 16 to attach the spacers.
The...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.