I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes.
Click to Support Signs101 ...
I've had luck with getting new parts from .digiprint-supplies.com for my Mutoh. Some things take a long time if they come from the manufacturer, but if they actually have them in stock they come pretty quick (couple days). I suggest you use the chat button to ask how long it will actually take...
My backup printer needs two new heads. I bought a couple of used heads from a repair company on-line pretty inexpensively with the hope that at least one will work and with a little luck both will (pretty inexpensive gamble).
Anyway, I'm guessing I'll need to set the software. Then I'll need...
I need a service manual for an Oki Colorpainter W-64s. Does anyone have one they can sell/share or point me in the right direction to get one?
Thank you,
Garrick
So back to the original thread title "building own laminator table". I am working to build one from a Gerber Solara Ion X flatbed UV printer we took out of service. The table is 5' 10' and very flat. It has holes for the vacuum table that I have covered temporarily with HDPE, but will add a...
Would knifeless tape work for you? Run the top and bottom of the stripe in knifeless tape, then put down a wider piece of vinyl. Pull the knifeless tape and take off the excess vinyl.
I took an old Gerber Solara Ion X flatbed printer out of service. After robbing it of all useful parts I am making the flatbed into something similar to a rolls roller. I have the bed, bearings and rails from the 5'x10' printer. I still need an actual roller. I'm thinking maybe a roller from...
When I'm at a customer's location making measurements for say a storefront or wall display, I tend to make a lot of measurements and draw a lot of diagrams on a note pad. Can you share what you have found as the best way to take your measurements (best tools for measurement and recording) and...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.