I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes.
Click to Support Signs101 ...
We have had 2 back to back ink cartridges go faulty within a few hours of printing. My guess is we need to repalce the pip. I have one on hand, but am unsure how to get to the diagnostic menu and what to do on the printer side after the actualy hardware of the pip has been replaced.
Any help...
We have recently started having errors in flexi where our printer stops mid print. We are sending the same jobs we have always sent without issue. It just seems so randomized. Has anyone else experienced this? I called flexi support and they basically told me that is normal and there is nothing...
Ok guys, we make alot of decals on a laminated material. All of the decals hav a few 1/2"-1" circles in the middle. Currently weeding takes up the far majority of our time. I am wanting to cut these circles directly through the vinyl as well as the backing paper so thy just fall out or at-least...
We have been having massive issues with cut size inaccuracies on a brand new summa s2 160 T cutter, hp latex 560, and sai flexi. We tested the same jobs through winplot and got perfect results. However, when doing it with flexi the cut sizes range from 2mm too big to 1mm too small on small cuts...
How long can a mimaki JFX200 flatbed uv printer remain unplugged in a warehouse? I am looking at hone used locally that has been unplugged for 3 weeks. Is it a lost cause? It is only 3 years old, and was printing perfectly before being unplugged.
We have someone wanting us to manufacture iphone skins for his eCommerce site. Materials cost for the material he wants is about $2.30 a piece. How much would you guys charge ontop for profit for yourselves? He will be ordering a few thousand.
I have had terrible experiences with both companies so far. Flexi stopped running our cutters properly when we updated to 19, their support is now on week 3 of fixing the issue.
Onyx when we send cuts, does not prioritize or organize the cut pattern. This leads to a very random cut order...
I am looking to buy a flatbed uv printer to print onto plastic cases. I am interested in the roland and mimaki. What would you guys suggest? Any experience to shed some light on either?
The mimaki is faster and less expensive, but i have heard bad things about their support.
Hey everyone! We just got an hp latex 560 in, and we cant for the life of us get colors to match. we are using arlon 4600 with the correct ICC profile.
I am wondering, if we design in illustrator, should i design in RGB or CMYK? I am going to mess around with different rendering intents as...
Hey everyone!
We are in the market for a new printer and laminator.
We do only contour cutting print to cut. We have very detailed cuts and are printing about 100-200 feet of vinyl wrap a day.
We are deciding between HP latex 365, mutoh, and roland. Just wondering your advice for the best...
I am looking to add some custom case options for a few of our bigger clients, does anyone know what this process is?
Watch that video, they print onto a material, then heat vacuum it to the cases which then leaves the pattern but no film.
Thanks in advance!
Hey everyone!!
i recently ran across a company that is printing some insane bike decals. Somehow they are able to do matte and gloss finish on one print, as well as matte and metallic or chrome on the same decal. How is this possible? I am dying to know the process to expand for our fishing rod...
Hey everyone. I currently have a mutoh vj1324. Its old and needs to be replaced soon. Do I go HP latex? A newer mutoh? any other suggestions?
Thanks in advance!!
I run some mutoh printers, and I am finding it next to impossible to not have lint fly in onto the media and then ruining some print jobs if there are enough. Is there a ribbon or something similar I can put across to keep lint off? Or maybe a brush that goes across it all?
Do other printer...
Hey guys, I have a RS 54" wide laminator, recently I have been getting increasingly bad wrinkles or waves on the left side. I am guessing this is due to uneven roll pressure. almost like the left side feeds slower. Should I tighten the left side? Or loosen it?
OK,
so I got some 1x1 samples from 3m on some of their car wrap materials, and the print quality is unlike anything I've ever seen. The colors are so complete and clean when you look close up. I am not sure what printer they are using but the dot gain is amazing. I have contacted them to find...
I am doing a really accurate media feed calibration on my machine using the summa cut software. I just want to know if after I do the calibration using summa cut, it will save that feed calibration to the user profile on the machine? ex. profile 1 Is for a thicker material, and I do the feed...
So I have a load of templates that I cut with, I used to just cut with cutting master 4 on our graphtec. But now we have a summa. When I open the files in Flexi and cut them through it, I am getting double cuts. I have tried all different files and everything. Very frustrating. I am hoping I...
Hello,
So we make laptop skins, we run a summa s120t and previously a graphtec ce-6000. I design the files in Adobe illustrator and either cut them with sign master 3 on the graphtec or Flexi with the summa. We have always had issues with wandering accuracy. Sometimes a skin will be spot on...
Hey guys,
I was looking at a sticker a company gave me, and on the backing it had a slide across it like a (crack and peel) method. This way you just peel a small part of the backing off instead of needing to pick at the edge of the sticker with your fingernail. How do you do this on large...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.