I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes.
Click to Support Signs101 ...
We have a JFX200-2513. Recently the movement of the head started to get very loud. It seems like the head is having trouble or added resistance moving. I am thinking that the slide units on the linear rails are starting to go bad. I see that they have grease zerks on them, but they have a...
I replaced both heads in our JFX200-2513 printer. I have replaced several heads in the past with no issues. After replacing the heads, I filled up the heads and sub tanks. I did an air purge. I went through and did all of the print adjust alignments, 300, 600, 1200. BI, SI, RE. I checked the...
I have tried that. No change. I am thinking I will need to replace the head. I can't seem to find much information on replacing a head. But from the parts diagram, it doesn't look to difficult to take apart.
I am having problems with Light Cyan on head 1. Nozzle check is showing light cyan completely missing. It is working in head 2. No problems with any other colors in head 1 or 2. Have done several cleans and head maintenance. I cant get any light cyan out of head 1. Any suggestions?
Back in November, we had problems with head 2. We had several service guys come out and one replaced the head. That did not solve our problem. Nobody could figure it out. Later I was troubleshooting and discovered that the HDC board was bad, so I replaced it. That fixed the issues with head 2...
I tried troubleshooting many different things. Swapped HDC cables, Tested fuses, Completely shutting off and pulling the main power cable. Nothing worked. Ended up swapping in an older used head we had laying around and it worked great. So i am not sure what the problem was with the head...
We have a JFX200-2513. It is a CMYK+CLCLWW Configuration. It was printing just fine, went to print another job and head 2 stopped working entirely, no white or gloss. When I do a nozzle check, there is no print from head 2. When I do a clean, I can see ink purge out of head 2. I have cleaned and...
I have done several air purges, does not seem to make a difference. I will do nozzle checks and clear will pretty much not show up until I do a clean, then the clear will be fine. The filters were replaced with what PDS specified for filters for this color and ink type setup.
We had the white / gloss head in our JFX replaced a couple months ago. I am having problems printing gloss. Gloss bands so badly when printing, but if I do a hard clean before printing, it is fine. But I have to do it before every print. It does not happen for any other ink, only gloss. Also...
We need a new HDC PCB for our JFX200-2513. Mimaki is back ordered for weeks. We can't find a company in the US who has one in stock. Does anyone know where I can get one or anyone who has one for sale? we need one ASAP. Thanks in advance.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.