I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes.
Click to Support Signs101 ...
Jv33.
New cap top.
New dampers.
Correct adjustments made to said cap top.
Multiple inkfills and hard cleans.
But I'm not getting any of the ink to pull through.
Manually, no problem. The ink flows to the dampers and they're primed.
Head soak/nozzle wash has the fluid sitting in the cap top and...
Can anyone assist here?
I'm running rasterlink 6 and currently have 1 x jv33-130 and 1 x UJF attached.
UJF via Ethernet and JV33 via USB.
I've recently purchased 1 JV33-160, and I'm having issues conneting it to RL.
Mainly, it wont register a new printer.
to simplify this process, and...
I would like to print off some posters for our office over here.
Does anyine have any good sites they can recommend? Anything I can find online is of mediochre quality and not really clear.
Is anyone running 6 or 8 colour CMYKLcLm configuration on their JV33?
I've converted mine from dual 4 colpour to 8 lines, but I'm not sure of the cartridge config left to right.
Any help?
I'm finding it a little hit & miss at current using subbies for install work.
They all have their strengths and weaknesses, but I am finding it hard to deal with them if/when something goes wrong with an install.
I'm thinking about creating a formal agreement between me and the subbies that...
THink it's best I start a specific thread to this unit.
Me thinks I'm going to have alot of questions.
I've been receiving errors stating that the UV lamp is overheating.
Using the mitsubishi Acr ex001 profile.
1200x1200 re3s. Uni Directional
I am currnetly printing a base white. approx a...
Can anyon assist me here?
I'm about to fly interstate to packdown a 7151 plus and get it ready to ship.
I know when I do a DISWAY WASH or head clean on the 3042 that it combines both Magenta & Cyan or Yellow & Kay or both white channels due to the config of the head when doing this service.
Same...
Can anyone please confirm for me the width and length (footprint) of the 7151 plus?
Broken down, will it fit through our work door at 1100mm wide?
assembled it says it's 1570mm wide so I'm not sure if this dimension includes the base.
Can I create a hot-folder in RL6 that I can attribute the desired configuration that I commonly use?
EG, for example, I want to have a hot folder that configures automatically to print my SAV at 720 x 1200, CMYK, bi directional 24 pass etc etc... and another folder that is 720 x1200, CMYK+W uni...
I'm trying to get a bit of clarification here.
Am i right in assuming that as per my other printers, should there be a small rubber wiper attached to the wiper assembly?
Evrytime I search for UJF3042 fx wiper, I only find listings for the actual assembly.
E.G...
I came across this reel in FB and I have no idea what material or the process being used.
Can anyone shed some light on it?
https://www.facebook.com/reel/1362417564402931?s=yWDuG2&fs=e&mibextid=Nif5oz
I have a JV33 in running BS inks that I want to convert to Ecosol inks. SS21...
I'm currently need to make the choice to purchase a new mainboard or throw a hail mary in there.
I'm going to attempt to dump and flash the main firmware directly onto the chip via use of a CH340 reader.
But...
I recently stripped down a CJV150-75 and have this (plus other parts) available should anyone want them.
I received this printer from a friend who didnt use it enough and the white & silver inks ended up clogging the head. He was quoted a stupid amount from Mimaki to replace the head and lines...
Can anyone assist me here?
Currently I'm ripping the same file twice in RL 6.
First file to print white then the second file to print CMYK.
Can anyone asssit me here on how to create the layers so it can print automatically?
I know I can go in and change the output colours to what I require...
Any help is greatly appreciated.
My formentioned plotter needs a little TLC.
I've recently replaced the grip wheels and given it a nice clean but...
When cutting vinyl, it's not making a clean cut. I.E. the knife isnt lining up correctly when cutting shapes thus leaving a little tag and not...
After 6 months of trying to get my jv33 to print correctly....
After numerous head soaks....
New dampers...
New cap...
Capping station...
Flushing lines....
Numerous bottles of whiskey....
It now prints perfectly.
Hi all,
I'm currrently looking at upgrading from my mimaki UJF printer to something larger.
Main focus will be to print braille signs.
I'm getting mixed answers in if/how it can print braille.
Does anyone have this hybrid and actually use it to print braille?
WHat's the finished proiduct look...
I'm currently upgrading the production computer to something a little less than dinosaur but I'm questioning the transfer of Finecut 7 to it.
As with Rasterlink, you are able to delete the serial remotely from a computer and reactivte it on another through the web, but it doesnt seem like...
Is anyone able to shine a little light on this for me?
I have connected my Mimaki CG160 Fxii plotter to my computer via USB.
When I am trying to configure this plotter in SC, the USB path is not in the connection list.
I did do a trial of SC v2 and that definately worked. So I know there's no...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.