Search results

I run foam (Gilman INSITE REVEAL) all day on my colex with no issues. It sounds like an alignment issue, check alignment

so you recommend double sided tape and not weld?

Can you weld a hem on mesh like vinyl?

I have the same problem with the same printer and media. I stopped printing on my Epson and only print with my mimaki UV. I need to play with the heat and if you can dial it down let us know.

I'm using 20# blueprint paper which never had an issue on my Mimaki. What drives me nuts is till it starts printing and even canceling a job can be 20 minutes..

I'm hating my Epson R5070. It's so sensitive and any time it thinks the printhead scuffed with media it resets and that takes so much time. Just starting the printer or loading the paper everything is forever. I'm pulling my hairs out. Coming from the Mimaki I'm going crazy, quality is nice but...

Should I not be doing it in wood? He came in with this figured I'll do the same

A customer is looking to print these. What stake is this and who sells it? Thanks

I see this is almost 10 years old but looking for the same. Did you try these guys out? any other options around?

Looking for a wholesalers for wall plaques , I need for a few locations and ongoing project. Either printing the inside myself or outsourcing the entire job

I use inflow inventory management and anytime I start a sheet or roll I take it out of inventory. If I just need a partial sheet and find a piece there I'll use it but no need to take it out of inventory since it was removed already. I use the showroom feature for the employees to remove from...

Took 15 minutes for full 150 foot roll, no labor, perfect cut on the colex. I don't see how it can be easier or faster by hand

I have Onyx which don't think you can do something like that. I started now with Printfactory, I'll need to look into if I can do that. What are you suggesting, add it in the back of the hem and make the hem without bleed?

How can you add fiducials to hem. This does sound like a good idea though

That's what I did I used a 54" roll. I'm cutting it down on my colex. I would think the rolls would be made for 36"....

I have a job for 30 3x6 banners with hem and grommets. My question is can I print on a 38" roll and between the registration marks, margin of the printer and the hem I'm left with less then 35"? I know signs365 can take off .25" on all sides which is less then this. What is industry standard?

I sometimes have images in full color that the customer wants in b&w. What's the correct way to do this? I don't see an option in onyx to print grayscale. What I do now is hit print from the document and choose onyx as the printer then choose grayscale, but then I have to create the paper size...

It looks like I'm going with the Epson R5070. My dealer says it runs about .22 sqft. Can anyone confirm? I just ran some numbers on my mimaki UJV100-160 does it make sense I was running at .39 sqf?

I have the UJV100-160 but don't like the quality and looking for a backup and for when it's busy

So if I don't need white and don't do a crazy volume I should not go for the Colorado? I wouldn't want the larger inks because they will expire on me