• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

3D rendering software

10sacer

10sacer

New Member
Hello all,

We do a ton of lenticular displays all around the country and I am looking to find a program that will fairly easily allow us to provide a 3D rendered view of each side of a display to our clients so they can see the full effect of the art as a lenticular prior to installation. No complaints thus far, just trying to get ahead of the game and be a proactive service provider.

So, does anyone know of a program that we can use that will do something like take a single flat image and map it to a preset number of lenticular tiles and then allow the viewer to virtually move around to see the display in a variety of viewing angles.

I am sure something like this exists - but I am unaware of a product name or company to use.

Thanks,

Sean
 
Solventinkjet

Solventinkjet

DIY Printer Fixing Guide
This may not be the solution you're looking for but, you can make an animated GIF in Photoshop fairly easily. Might not give you the 3D look you're looking for but it will give customer a better idea on how the transition will look like.
 
JBurton

JBurton

Signtologist
Sketchup is very easy to learn, you can set up 'walk throughs' of models you've made, though I'm not sure if you'll have to pay for that feature.
10sacer said:
So, does anyone know of a program that we can use that will do something like take a single flat image and map it to a preset number of lenticular tiles
Click to expand...
I think if you find that software, you'll find yourself doing fewer of these yourself, and more janky print shops pushing them out.
I'm curious, do you do anything more than split the image into panels and apply to opposite sides of fins? Like, do you distort the image to gain a straight on perspective from a given side?
 
10sacer

10sacer

New Member
JBurton said:
Sketchup is very easy to learn, you can set up 'walk throughs' of models you've made, though I'm not sure if you'll have to pay for that feature.

I think if you find that software, you'll find yourself doing fewer of these yourself, and more janky print shops pushing them out.
I'm curious, do you do anything more than split the image into panels and apply to opposite sides of fins? Like, do you distort the image to gain a straight on perspective from a given side?
Click to expand...
No. We have tried that and it tends to make the distortion worse since there is really a small window of perfect viewing angle achievable - at least when there is text involved. We do both the fin type with a third static image viewed from straight on and the triangular "lens" type with only two messages on left and right.
 
JBurton

JBurton

Signtologist
10sacer said:
We have tried that and it tends to make the distortion worse since there is really a small window of perfect viewing angle achievable -
Click to expand...
I'd imagined as much. Would work well for something like an art installation, with a 'stand here' floor graphic, but absolutely worthless for a passerby to see and perceive.
 
E

Evan Gillette

New Member
I was playing around with one in Autodesk Fusion with variable spacing to try to get the best viewing from 3 images (very basic graphics) and could probably figure out a way to drop the fil in once and have it "mapped" to each instance of the model. Rendering in fusion is pretty good too. Ill see if I can send a web viewer link.
 
N

NathanScott

New Member
10sacer said:
Hello all,

We do a ton of lenticular displays all around the country and I am looking to find a program that will fairly easily allow us to provide a 3D rendered view of each side of a display to our clients so they can see the full effect of the art as a lenticular prior to installation. No complaints thus far, just trying to get ahead of the game and be a proactive service provider.

So, does anyone know of a program that we can use that will do something like take a single flat image and map it to a preset number of lenticular tiles and then allow the viewer to virtually move around to see the display in a variety of viewing angles.

I am sure something like this exists - but I am unaware of a product name or company to use.

Thanks,

Sean


Replying for the update. I love to play games and that is why I always search for them online. I always prefer to play online games. I also play online real money games and I have already found https://casinosanalyzer.ca/casino-bonuses/rocketplay.com website link where I found those sites through which I can easily make a lot of money. Over there I also found an amazing welcome bonus and free spins on those sites which helps me more in making a lot of money.
Click to expand...
Have you found it?
 
V

Vassago

New Member
Most 3d programs will do a thing called a uv wrap.

But unless you've got a standard product you're going to use so you can get the unwrap correct, I'd leave it to specialist companies as it'll cost..

Do your clients want this?

Will they PAY for it?

If not.. It'll come out of your pocket
 
10sacer

10sacer

New Member
Vassago said:
Most 3d programs will do a thing called a uv wrap.

But unless you've got a standard product you're going to use so you can get the unwrap correct, I'd leave it to specialist companies as it'll cost..

Do your clients want this?

Will they PAY for it?

If not.. It'll come out of your pocket
Click to expand...
We would build the cost for a 3D proof into the cost of the entire project. We have a prepress and design department that could probably figure out a fairly straightforward program to do this if we knew which program would work best for what we are trying to achieve.
 
V

Vassago

New Member
Blender, rhino, 3d studio max, maya, etc..

There are thousands of suitable programs - Blender is free.

Problem is - it's not always as easy to do the things you want. Even though it's portrayed as simple.
.
3d modelling is easy, but it's a different inductry..

I'd start with blender as its free and there's a big community who use it.

Alot of vr rigs accept files from these programs.
 
V

Vassago

New Member
10sacer said:
We would build the cost for a 3D proof into the cost of the entire project. We have a prepress and design department that could probably figure out a fairly straightforward program to do this if we knew which program would work best for what we are trying to achieve.
Click to expand...
Tbh.. Most of your choices will be made by what vr system you choose.. What file types it accepts and what program can generate them.
 
You must log in or register to reply here.
Top