• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

JV33 resetter not working after motherboard change

JOKO-SLO

New Member
I use the MIMAKI JV33-160 for sublimation printing. When I changed the printhead I accidentally burnt the motherboard (cannot download the CSV from the old motherboard). So now I changed the motherboard (bought a used machine for little money) and installed the 2.20 firmware on the machine.

I have the circuit board as in the attachment for resetting the inks, because I have Bulk system. When I press the button it resets the inks from 0 to 9.

I have selected Sb51 6 colors (as I have CMYK and fluo yellow and fluo magenta). Now 6 colors it resets and shows ok, and 2 of them cC are not recognised.

Is anyone familiar with this resetter or has a clue how to solve this problem?

166793176_10227871576274234_6164706731542540206_n.jpg 167141726_10227871576034228_7713901575924680369_n.jpg 167140440_10227871519752821_667495158685056945_n.jpg 166904302_10227871519312810_2446024872280104726_n.jpg
 
Last edited:

7_nebo_7

Premium Subscriber
I am using mimaki ink chip resetter much more reliable and works with all JV33 mimaki ink chips.
 
Top