• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Workbench for garage

rfulford

New Member
I thought I would share some photos of a workbench I just completed for the garage. The project was cut entirely on the CNC from 2 sheets of 3/4" plywood and 1 sheet of 3/4" MDF. The edging around the work top is made of poplar. I found the plans on the internet and adapted it to CNC using dowels to align the pieces during glue up.
 

Attachments

  • Table 1.jpg
    Table 1.jpg
    66.8 KB · Views: 179
  • Table 2.jpg
    Table 2.jpg
    63.8 KB · Views: 171
Top