I usually stop on red.
it'd be helpful to have printer/head info to help you out. It looks like you have cross-contamination in your heads. This can be caused by the drain tube or pump being clogged and allowing one color to flow back up into the other head's line while it sits son the capping station. (assuming this is supposed to be CMYK)
one of your black heads is starved for ink or clogged to hell.
looks like you got a mutoh. go into the cleaning menu and give it a "little charge"
I found with mutohs, depending on your black ink limit, if you give them a slight pause in the interval time it helps with ink starving quite a bit.
half a second will do it. however on banner material I really never need to adjust for that.
Maybe add another option: Adjust the media comp and droplet position.
Try to follow along here sport. The thing was working and now it's not. Unless the printer demons diddled the settings of which you speak without proper authority then why would you do such a silly thing?
купить спайс детское порно фото проститутки иркутска снят проститутки проститутки волгограда проститутки омска купить огнестрельное оружие нарезное
Which, via a Cyrillic to English translator, comes out as "buy spice child porno photo prostitute Irkutsk [url = http://pravogolosa.net] removed [/url] escort, escort in Volgograd prostitutes Omsk to buy firearms rifles "
It would seem to be touting hot Russian babes and guns rather than any sort of sign issues.
I agree with most of the posts, looks like you have a clog. We have a Roland that does this - first time around we had dried ink in the line that needed to be pulled out. Second round, an ink cartridge didn't communicate with the printer and went bone dry without pausing the print. See if you can run a print test - usually will tell you which channel or print head is having an issue.
Signs101.com is a discussion forum for professional signmakers and graphic designers.
Terms & Conditions Of Use
All posts and other information available at Signs 101 should be viewed as the opinion only of the poster. No claim is made that any information is accurate. As such, each reader should not rely on any information available here as accurate and should independently verify such accuracy. In addition, no claim is made that posts made here will be free from profanity, obscenity, rude, hurtful, libelous or insulting opinions of the poster. Such posts should, however, be reported to an Administrator for review.
Neither the owners, employees, officers nor directors of Signs 101 shall be held responsible or liable under any legal theory for any loss or injury resulting from any post, information made available, policy, action or lack of an action at Signs 101. Your use of this website is your acceptance of these terms and conditions of use.