Recent content by AHornback

The Language in the machine was causing the off cuts. The Engineer here had changed settings in the machine. HUGE thanks to P Wagner for the tip!!! the language was messing up everything!!

The Language was also causing my off kiss cuts..

You are amazing!! Thank you!! Unfortunately I'm not the only person working on fixing this equipment. I am the only person with real sign experience. My organization has Engineers that "Work" on equipment . they called me as a last resort. So thank you!! with your help I have fixed 3 issues that...

We fixed the wobbly cuts. Now its still cutting to the right of the prints. scans all marks then always to the right by almost .25 inches

Blade is tight. and in the back hole

Recently installed new motor on Graphtec 8600-130. since doing that anything I send from Flexi is jibberish single line cuts. I can cut from cut master fine. any ideas?? Prior Flex would only let me print 3 jobs then have to restart to send more

Maintenance installed the new motor and didn't take up slack in the belt. That helped A LOT!! I installed cut master and can cut cast vinyl. My printed still cuts off. I print in flexi project manager and try to cut in cut master. but its acting like the brackets are closer to the cuts and when...

Cuts made this morning.

It scans 4 corner marks. This cutter is 6 years old. and just started doing this prior to the new motor being installed. the whole print is 48x36 with 55 items to contour cut. The printer is a 2 month old HP latex 360. and the off cuts are at least consistently wrong. What I have done is...

I will find out for sure in the morning. but I believe its all the time. Yes Everything we cut is off.

When the machine starts the cut the first row on the left is pretty good. As the machine works up and down cutting the cut is consistent. as it moves to the right the cut becomes worse moving up to .25 off. We installed a new Y axis motor but had this problem prior to that. any idea what we need...

So I solved and answering should someone need the answer. the Prox sensor bracket on the back had been removed by an "engineer" got it put back on works. now. Center roller was not being detected. and the engineer had not plugged all cables in firmly. so here again. Cutter is now operational.

We replaced the motor now it hits the right side and grinds. Do I need to do a whole reset of the system?

When initializing the machine will go to the right and Beeps and errors out. Nothing more. Only goes right. Called maintenance they say the motor is out? what about a limit switch? Waiting for a motor but want to make sure no one else has had this issue and it be more than that. Also If you...

So far nothing has worked. we are printing these in version 12 now. Someone suggested it is the RIP engine that Flexi is now using. Hopefully they get it fixed or I just wasted a bunch of money.