Recent content by arvindrlaxman

Hi all, Our machine was stalled for more than 4 weeks due to lack of ink supply from Fuji.. Received the inks yesterday, fighting really hard for clogged white nozzle.. Any help ? How to go about it.. We are from India btw.. Regards, Arvind

Guys, We are printing on brass 500 numbers totally.. When we print clear after printing the subject...There are a lot of dots appearing on the clear coat. Our customer is rejecting it because of the dots. We tried polyurethane 2 pack coat..That also doesn't seem to work.. I am running out of...

Hello people, We have a huge order for printing on Brass with clear. When we use clear there are few dots seen in the print..When contacting fuji they told us that it is unavoidable..Is there any other way we can clear coat the brass..Running out of options..

There is an option to lower the ink density. If your ink density is 100% try lowering it down. Should make a difference. And i have a doubt which one of them provides a glossy finish. KI or KO ?

Hello people, Our acuity is creating problems. It takes in the printing file. The heads starts moving but the printing is not being done. There is no error shown on the acuity server. Please help. Very urgent. Fuji service people are out of station. The ink levels are all correct!

Thanks pat , No we dont have a laminator. We have a really good air compressor. Any spray type coater available ?

Hello friends, WE are printing foam board 4x8. Customer need glossy finish. We print using Fuji acuity. Is there any solution for making the print to Gloss finish. Please help ! URGENT ! Any spray lacquer ??/

We print exclusively on plastic sheets using a xerox 770. The problem is once we thermally laminate it ( GLOSS )..Contours around the pictures are seen. Is there any better lamination film available for the same ? TIA..

Dear friends, I would like to know the ideal conditions for my flatbed printer. My clear ink when printed have a series of dots along with it...

Thanks pat , After nearly 36 hours of machine stoppage fuji people discovered that the black print head was a problem. They've changed it now.. We had this problem for over 4 months, but it was only today that they discovered the problem. The saddest part is we have printed more nozzle tests...

We got a big job order to print yesterday. While printing acrylic. The black nozzle got blocked. We had this issue for quite a while now and representatives from Fuji rectify it temporarily. My knowledge on inkjet printers is that we need to troubleshoot them occasionally.. but for us we'd need...

Hello guys, We've been thinking of complimenting our flatbed printer with a trotec SP1500 laser cutter.. Thinking of using it for both gift articles and signage. Any suggestions ??? Esko, Zund seems to be very costly...

Thank you for the suggestions mate !! Getting better... Some days colors are fine...somedays colors are really bad! Working on it..

We have problems on color reproduction while printing on canvas with the acuity.. The monitor shows a real dark blue color ..but when printed on canvas the color is purple.. what could be the problem guys??