Recent content by bpatrick3

Yep, always babysit the unwind and take up of the material, I have tried a lot of slack and a little slack. It should be that fussy, some rolls I throw on and print all day with no issue, but once in awhile I get a roll that is fussy.

I have tried all different settings including no heat

I do all the things that you mentioned Thx

I print a ton of 13 oz banner on my Versacamm(I use a couple different brands) and for some reason I run into rolls of material that tend to bulge up and cause a head strike and usually ruins the banner. I have tried brand new pinch rollers and then tried all different configurations of pinch...

Andy what you are seeing is where ever you print medium to heavy ink on the first side it will soften and swell the vinyl so that when you look at the second side you the that swelling or "embossed" look. I would recommend either an 18 oz blockout banner material or do as I do and print two...

Shame on me for not knowing this one.

Was wondering the prferred method for mounting 1" HDU signs 18"x24" to single 4x4 post. Thanks

Can someone tell me the safe dry time before rain, it is on a horizontal surface(concrete) Thanks in advance

You need to print on gloss white poly film or any other super smooth material and then face mount using optically clear adhesive meant for face mounting. It is very tricky and pricey but is the proper way to do it.

Bummer, Facebook says the content is not available

Does $3600.00-4200.00 sound crazy for wrap printed and installed

I am printing and Installing, The masking tape is a great tip. Thx

Thanks so much for your insight.

I need to quote a wrap for this mini bus and I have never wrapped a vehicle with the bulged out side rails. The protrude off the bus as shown in the close up photo. How difficult are they to wrap? Thanks

My landscaping customers has been bought by another company. I need to deidentify the pick up trucks which are mainly cut vinyl. And then also deidentify a trailer partial wrap and a transit van partial wrap. Was hoping to get some help with preferences that you guys have on chemicals, heating...