Recent content by Bradley D

trimless edge channel letters with painted gold perf vinyl to be white at night and gold during the day

Yes. I am a merchant member. At least until Sept. 27 then I'm not sure if I will renew after that or not.

We fabricate letters wholesale and don't install. In fact, I've never done an install. We don't have the equipment, license, nor insurance to do installs. But, I have the opportunity to help with an indoor install for an organization that I'm associated with and I'm going to help them do...

you should be able to get a used one for free...many companies have one gathering dust in the back of the shop

SDS Automation ex bender with AXYZ router. Many other great router alternatives but I like Vectric software the best.

I'd recommend the 3m performance gun with 1.3mm tip.

I can't help with tips for the Accubend but I'd recommend dropping some cash and investing in an SDS Automation bender which is what I use and then I could give you some great tips. I just finished the following job and matched the returns to the back of 16" "NICK GREEK" job within 1/32" or...

Cost per upright inch is not the only way but is a very common way to price channel letters for wholesale channel letter fabricators. I also use this as just a starting point. After keeping close track of materials and time for many similar jobs, patterns emerge and time can be saved by being...

Thanks for the picture. I often have issues with my channel letter coil as well having an edge that has slitter issues. I'm probably the only one that notices if the burr is beyond spec for such things because I do trimless letters. Anyway. I was going to try Evercoat featherfill g2...

I usually make stuff like this out of 5052 H3 aluminum 1/8" with MMA adhesive backer. I guess what I really need to try is a fast dry high build primer. My epoxy primer says you need to wait 4 days in order to sand it. I don't wait 4 days but I also haven't done much sanding beside...

Awesome. very helpful.