-
I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...
Bxtr's latest activity
-
Bxtr replied to the thread One-step away from buying a channel letter bending machine..We bought an Accubend Freedom and just like said earlier once you understand the constraints of the machine and how to design for it. I...
-
Bxtr replied to the thread White or Clear acrylic for push through..We've always used clear and backed it in white translucent vinyl. The vinyl goes to the edge of the back of the acrylic which is a good...
-
Bxtr replied to the thread What’s your thoughts on a Vanguard VR 6.The hybrid was fine on flat stock as long as registration didn't matter. The conveyor vacuum is not a true science in my opinion.
-
Bxtr replied to the thread New Employee Training.Our first position for any hire is production. That way they get a feel for the materials/applications and get to know the what and...
-
Bxtr replied to the thread What’s your thoughts on a Vanguard VR 6.Hello, We have a Vanguard VK300D, it's a little over two years old. It has been a huge leap forward for us in comparison to our EFI...
-
Bxtr replied to the thread LED Retro Fits.We've bought the SignHero brand replacement bulbs. They are double sided and have worked well for us. Glantz has them available...
-
Bxtr replied to the thread Deciding Between Industrial CNC and ShopSabre.Hello Jonathan, We currently have a base model Multicam 1000 series, it's a tank. But when we need service, it's been crickets. They...
-
Bxtr replied to the thread Cutter or Router: Colex v Shop Sabre.Hello, we currently have both a Summa F1612 Flatbed cutter and a Multicam 1000 Series router (Base Model, no tool changer) The workflow...
-
Bxtr replied to the thread Suggestions Bringing banner finishing in-house.We got this grommeter from YESCOM it comes with 10,000 grommets! It's been cheaper to buy another one of these instead purchasing the...
-
-
Bxtr replied to the thread White Ink Adhesion.I've only used the AP-3155 on acrylics, even then if you aren't printing heavy saturation or solid colors 1st surface you can see they...
-
Bxtr replied to the thread White Ink Adhesion.Patrick, are you having any luck with any materials? Or can you get sample sheets of different products than you normally use from your...
-
Bxtr replied to the thread Suggestions Bringing banner finishing in-house.We've been using a Leister welder for 20+ years. We've had the same machine and have had to get it repaired every five years with maybe...
-
Bxtr replied to the thread White Ink Adhesion.Hello Patrick, We have a VK300D-HS 6-head setup so 2 heads of white ink. The only issue we've ran into with ink flaking off is print on...
-
Bxtr replied to the thread Kiss Cut on a Zund/Summa/Kongsberg.We have a Summa F1612 and we have the software set down position and depending on the vinyl/lam configuration we always do test cuts and...
-
Bxtr replied to the thread Brick Vinyl Removal and Install.We have installed 3M 480 on brick, it took us little to no time at all to remove. It was up for 2 - 2 1/2 years 26'x10'. It was on bare...
