• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Recent content by C_support

  1. HP 570 - errors.

    Thank you! I will try swapping the SSD and the main board, and if I don't have luck, I will contact them.

  2. HP 570 - errors.

    The price includes everything - parts and labor.

  3. HP 570 - errors.

    Sorry, 79.2:04

  4. HP 570 - errors.

    A little update. The HP support recommended on-site service. $1900 with response time up to 5 days. They can't say over the phone what part must be replaced. I purchased the original SSD and will try to replace it first - it cost me $260 from eBay. Then the main board... The main board is...

  5. HP 570 - errors.

    I recently purchased an HP 570 printer in addition to an HP 370. It was a used machine not connected to any RIP by the time I checked the machine. Was able to print report and the printer was functional at this point. When I moved it into my shop, I replaced some empty 3-liter cartridges...

  6. Onyx Thrive and Colex Marks

    Output to device menu. Number of copies - total number of files on the table. Then, copy options - set how many copes are in the X and Y directions and approximate spacing between them.

  7. How can I disable my SharpCut's safety sensors?

    It could be disabled through the software.

  8. Onyx Thrive and Colex Marks

    If you have 1 file printed with the "step and repeat" feature you can activate this feature at output to device. The software will read all copies and cut everything in one shot.

  9. Older Colex parts.

    This is a Colombo 3HP router. Did you try contacting Colex for the router nut?

  10. Onyx Thrive and Colex Marks

    You can change the spacing for the reg. marks placing or you can set the Optiscout to read less marks.
See more
Top