Recent content by Colt

Do you know of a place with instruction on cutting straight out of Corel? I used their plug in. Best was when I was using GCC, and could copy my object and paste right into Great Cut. Real simple. I did a cut out of Corel through the Graphtec add on and noticed some of my objects didn't...

Got a Graphtec CE5000 in. It comes with a 45* blade and is setup for a 45* blade in the settings. I replaced the blade with a 60* blade and am wanting to know what settings you guys are changing to accommodate the 60* blade? Default it is setup for example with a 0 Offset, and the Offset...

So that little L cut is called a "tick"? What's its purpose, to align the blade? I'll have to see if that is adjustable where it does it at, but a little confusing having to remember that little tick mark when you are cutting different jobs on the same sheet. As you don't want the "tick" to...

Got a Graphtec CE5000 in. Right before it starts a cut job, it does this little L shaped cut like 3mm long. It even does it before it does a test cut. This L shaped cut ends up being in part of my object. Why is it doing this L shaped cut, and how do you make it not do it? Also, on my...

Last I checked Rowmark is plastic. I'm referring to aluminum.

I'm looking for brushed gold aluminum blanks that take sublimation. Looking for a Matte finish, i.e. no reflection. Something like .02" or .03" thickness. I see Dynasub has brushed gold aluminum blanks that take sublimation. But has a reflective finish. Can't seem to find it in a Matte finish.

Cleaned the doors off to redo the vinyl again as I cleaned off and redid the vinyl 6+ months ago. And noticed that you could still see the old vinyl from 6+ months ago that I had removed when wetting the glass. One thing I noticed is when spraying the glass with water, the water would bead up...

Yes what?

Okay, then similar to Oracal 751 with air release channel.

I know there is printable vinyl with air release channels. I'm referring to plain cut non-printable vinyl with air release channels. i.e. something like Oracal 651 with air release channels. That printable vinyl is like 3x the cost of regular vinyl which is why I was looking to see if there...

Do they make any regular cut vinyl with air channels? I know they have the wrap and printable vinyl with air channels. But was interested in regular cut vinyl since that type of vinyl is cheaper than printable and wrap vinyl.

It's not a big deal. Was just interested in learning the cause in case I got a complaint or something in the future and could then explain it on the spot.

Okay. Just thought 3 months was rather short period for it to happen. Not too big of a deal as you only see it when it gets wet. Was just thinking about possibly getting a complaint in the future if they clean the glass and with the glass wet being able to read the old vinyl that was on there...

I had thought it was adhesive not fully removed. But people say it is from the vinyl being on there pretty much for years and stuff. But I did a vinyl job on their doors. Then 3 months later, they had me redo it cause of a change. And I had noticed the same thing with 3 month old vinyl. What...

So the Isopropyl can leave a residue? What about denatured alcohol? Does that stuff leave a residue? I've got some Klean Strip denatured alcohol along with 91% Isopropyl.