Recent content by DChorbowski

Its not great to remove I have had instances of adhesive being left behind and alot of elbow grease and solvents to get it off. IJ8150 on the otherhand removes great and its optically clear. Just no Comply, so wet install.

who hurt you?

We have had received good printed flexfaces from Indy Imaging. Prices are reasonable.

Its in the direct sun. ACM expanded in the heat and due to mounting holes it had nowhere to expand so it bowed out. ACM mounting holes should be a little larger than the bolts going through it. Also it very much needs a frame and more mounting points. One strong gust of wind and thats...

I have used this trick with both frosted and dusted crystal vinyl. Maybe it will work with the film you are trying to remove. Give it at least an hour or more during soaking and it worked for me like a champ!

Thats a fantastic idea! No more rolling trashcans falling over for me!

Is it possible to print a layer of white over the blue and gold to make it more opaque and then apply the tape?

You wouldnt happen to have a vector outline of that shape by any chance or was it hand fabricated?

Do you happen to have a shop dog or cat? I agree with danno, looks like hair on bottom of print carriage thats getting dragged through the uncured ink while its printing.

Do you have any examples of what you are trying to achieve?

Look into UV DTF prints. Its a Direct to film transfer and the end product is very nice and glossy due to the clear varnish layer the UV printer produces. We have used Ninja Transfers and the end product was very well received. Very easy to apply and seems very durable. Theres a ton of...

Thats great info, thanks!

We have experienced similar with polycarbonate faces in the past. There was moisture trapped in the poly and when heated up caused the vinyl to bubble. We had a whole batch of this poly we had to "bake out" in the sun for a few days before vinyl could be applied.

What is the service menu password?

I would start with HP support @ 1800-204-6344. If your out of warranty you will have to pay a small fee to get over the phone diagnostics and they will determine what parts you need replaced. From what I understand they have several tiers for cost thats determined by what parts you might...