Recent content by dfritz08

The print head has been that way since I bought the machine 3.5 years ago from the original purchaser, never had a problem with it and it still prints fine. It's not worth it to me to replace it since I have a 54" Roland that I use for the majority of my work and I've downsized my operation and...

printed a small test image (10x10") - printed fine printed a test nozzle print pattern - printed fine began full size print (50x50") - color drop out after approx 12" printed test nozzle print pattern - more than 50% of the magenta lines were missing ran strong print head recovery -...

i should clarify, i don't see air in the lines connected to the print head, there's air in the lines connecting to the capping station

fixed issue... new issue well... i worked late last night and got it figured out... I'm using Flexi Production Manager and there is a small dropdown menu that says, use color correction, use linear correction only , and no color correction... it was set on linear correction. Switched it to use...

ok, did some searching and found ICC profiles from orafol, loaded the one for my material and there was no change at all, I have no idea how to make an ICC manually... any help?

"Baxter, you know I don't speak Spanish"...

I'm doing some test printing and trying to figure out the best printing settings to get better quality and photo realistic prints from my 8000s... I printed out a test of just solid colors from photoshop and the color match is fairly close (I know it wont print EXACTLY like whats on the screen...

I just started printing a banner and it seems to be printing fine, i dont see any clearance issues and referencing where the broken piece was laying I think it somehow contacted the left pinch roller... usually when ive had material bunch up and interfere with the print head it has stopped the...

is this something I need to be concerned about?

there was a job printing and i heard a crunch/snapping noise from the printer and go over and see this piece sitting on the material, any idea what it is and where it came from? i'm thinking it came from somewhere on the print head, it has a QR label but it wont scan cause it's too small, has...

i ended up taking the strip back out and carefully pulling it through a papertowel with alcohol on it and let it dry well... figured since it wasn't working and i've got another on the way whats it going to hurt right... got what seemed to be a substantial amount of "dirt" off it... i dont think...

thanks for all the info, i cleaned it and it didn't fix it... actually made it occur more consistently... flipped it over and... 100 times worst... so i placed an order for a new one through your website robert... thanks! couldn't find the manual but i placed the order anyways cause i have...

forgive me for my ignorance, but i've only been in business for a few months... what's the encoder strip?

so i've been having this intermittent issue and have determined that it's not a software or computer issue... I can send the same file through and it will either happen or it wont... about 50/50... the only time i know it wont happen is if i shut off the printer, disconnect the power cord and...

i'll keep that in mind, didnt realize versaworks read tiff files...