• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Recent content by dinomaskot

  1. FC9000 - Cut's 0.625" off

    I tried CM5 with last couple of updates, and they all have issues (for me). So i stick with the CM4

  2. FC9000 - Cut's 0.625" off

    Have you tried CM4?
  3.

    FC9000 - Media lock issue

    to help you when positioning a roll of vinyl
  4.

    FC9000 - Media lock issue

    Just got FC9000 and I've noticed that the media lock is not working as it should. Am I doing something wrong or could it be factory defect? (All of the screws are tight)

  5. Mimaki UCJV RIP CMYKWWCLCL ICC profiling

    I'm currently using stock profiles for my UCJV330... Would you guys recommend making custom profiles? Less ink consumption?

  6. Positioning roll of material - Marks

    Back of the mimaki roll to roll printers so that the pinch rollers are always in the optimal position

  7. Positioning roll of material - Marks

    Hi, do you guys have any tricks and tips for positionig various roll sizes, like marking where to position them or something like that?

  8. UCJV330 Pull Back Printing (Multi Layer printing)

    I use original, and its sticky as well.. :(

  9. UCJV330 Pull Back Printing (Multi Layer printing)

    Does your clear feel sticky?

  10. UCJV330 + RL7 - Space between jobs

    Anyway to reduce space between jobs? I've changed from intermittent to continous on the UCJV and that doesnt seem to do anything..

  11. Perf cut after laminating transfer tape?

    I need to do a lot of cut vinyl stickers. I was thinking of laminating the transfer tape and then perf-cutting the whole sheet.. anyone tried this? possible?

  12. UCJV330 - White ink waste

    Its now at 16/24% and the bottles feel like there is barely anything left in them. I'll get the kitchen scale and keep track more precisely when i change the bottles

  13. UCJV330 Gloss Curing

    I haven't noticed that. I'll keep an eye on some stickers that I have in the shop, and will report back on monday if I have any like this. I noticed that the vinyl is "raised" only when i did the 2.5D

  14. Need Help Perf cut on graphtech fc9000/fc8600

    ikarasu One more question.. I have sometimes stickers that have pull tab which needs to be kisscut... think i can do it on PERF strip as well? (still dont have FC9000, but hopefully I'll get it in January)

  15. Need Help Perf cut on graphtech fc9000/fc8600

    If I got you correctly, you kisscut deep, on the limit of cutting all the way. And you are doing it using PERF strip NOT KISS Cut strip?
See more
Top