Recent content by FelixS

I could spin some out as it's going through maybe? Usually when it's running, the pinch roller pulls and the material roller just free spins as it's pulled, I don't keep it tight. If that makes sense..

The dial only goes to 10, but I've tried it from about halfway up. The material usually had smaller waves in it though that's why I keep it so high. I'll try it though.

We have an EFI 32r+ and have a big issue with materials wrinkling up in the center. It's done it with 13oz scrim, 18oz double sided scrim, mesh and no matter what I do it still does it after about 15' of printing on any roll I put on it no matter how good the initial tension is. The machine is...

Okay? Thought questions were supposed to be asked here. The email I got from the customer if the first part of the post which is why I'm looking for if someone has any clue what to do with it. It's going on a historical building, so they don't want the wall to be damaged. Fasteners can go into...

Hello~ I'm wondering what would be the best kind of substrate to use for a very large outdoor mural. Something that is sturdy and weather proof. The panels have to be installed in the mortar joints only on the building so it can be removed in the future without damage to the surface of the...

Thank you for the reply! I've been trying to ask around locally as well so I'll shoot another reply if I find anything out!

Hello~ We’re looking at getting a sewing machine for banner finishing and I was wondering if anyone had a solid recommendation on which one will work well. We have an EFI 32r+ and have been double sided printing on 18oz banner material. We tried banner tape and in the Texas heat it just doesn’t...