• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Forty One's latest activity

  • Forty One replied to the thread UJF 7151 plus thread..
    Smoke_Jaguar did you have success in repairing the sub tank etc? I'm still getting the Overflow error on the K & white channels...
  • Forty One replied to the thread Where does this fault lie?.
    Not sure if it was the cap top or the hoses I replaced from the cap top to the pump, but something worked.
  • Forty One replied to the thread Where does this fault lie?.
    Two steps forward....
    • 1000003871.jpg
  • Forty One replied to the thread Where does this fault lie?.
    Along way to go, but I'm getting there. So as per Neil's advice, I've found that the cap top isn't sealing 100% Seems in the front...
  • Forty One replied to the thread Where does this fault lie?.
    Solventinkjet yeah, this is a rebuild. It was runnning Bulk BS3. I've replaced all the lines and the rings etc. I'll check that fuse...
  • Forty One replied to the thread Where does this fault lie?.
    Wouldn't it come up with a slider F1 etc error? I've only been able to get a few nozzles from a Kay channel to print Since Kay is smack...
  • Forty One posted the thread Where does this fault lie? in Mimaki.
    Jv33. New cap top. New dampers. Correct adjustments made to said cap top. Multiple inkfills and hard cleans. But I'm not getting any of...
  • Forty One replied to the thread Issues adding multiple printers into Rasterlink.
    Don't worry. I sorted it out. in your printer, you need to rename it physically under the Machine Settings menu. Default in this case is...
  • Forty One posted the thread Issues adding multiple printers into Rasterlink in Mimaki.
    Can anyone assist here? I'm running rasterlink 6 and currently have 1 x jv33-130 and 1 x UJF attached. UJF via Ethernet and JV33 via...
  • Forty One replied to the thread UJF 7151 plus thread..
    so, a re-circ pump system? would love to see a little video of it in action if possible.
  •
    Forty One replied to the thread Help! Flexi Wont open..
    windows 10? Have you tried removing it completely and reinstalling it? Generally when this happens a file has been courrupted etc. If...
  • Forty One replied to the thread UJF 7151 plus thread..
    Thanks. Since I have not got a full size flatbed, I think I'll stick to manually applying it by hand
  • Forty One replied to the thread UJF 7151 plus thread..
    Side note, Is anyone running a primer and LH-100 inks on this? From what I can see, only LUS-120 primer is available for this, but...
  • Forty One replied to the thread UJF 7151 plus thread..
    Don't loose faith Smoke_Jaguar . You've got the most info yet on this machine! I need a point of reference! :)
  • Forty One replied to the thread UJF 7151 plus thread..
    Hey Smoke_Jaguar , if and when I need to swap out the head, is it as simple as disconnecting and swapping out? Or do I need to prime the...
Show older items
Top