• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Recent content by identity78

  1. problems with contour cutting on Vinyl Express Q100

    I had a tech guy to help me fix the problem. I had to hold down the test and enter button down simultaneously at start up and went through the menu to align the sensor

  2. problems with contour cutting on Vinyl Express Q100

    We are having misalignment issues when we try to do a contour cut. It seems to get worse when we try to cut something small. Is there a way to calibrate the ARMS on the Vinyl Express Q100?
  3. identity78

    hi

    hi

  4. Need To Find Out Who Services Vinyl Express Q 100 Cutter

    Ok Thanks We will check that out.

  5. Need To Find Out Who Services Vinyl Express Q 100 Cutter

    Well it needs new pinch rollers because it slips from time to time. Also after we cut a job, the cutter machine keeps rolling out the vinyl until it rolls off of the tube.

  6. Need To Find Out Who Services Vinyl Express Q 100 Cutter

    Good Afternoon, Our company is in North Carolina and we are trying to find a company that would service a Vinyl Express Q 100 cutter in our area. Does anyone know of any companies?

  7. depth issue with Vision Engraver 1624

    So we installed a new proximity sensor for our Vision 1624 engraver. When we try to drill our braille using the braille bit, it wont drill the braille holes deep enough on the acrylic. We then adjusted the micrometer by zeroing it out then turning it counter clockwise around back to 0 then...
  8.

    printing problem with Mutoh VJ-1204

    Thanks everyone. Everything is fixed now. We ended up having to get a new print head.
  9.

    printing problem with Mutoh VJ-1204

    Im going to take the plastic cover over the dampers off and see if I can adjust it that way. If not we'll have to call a service person to come fix it
  10.

    printing problem with Mutoh VJ-1204

    I moved he head to the middle and the head is not parallel with the platen.
  11.

    printing problem with Mutoh VJ-1204

    just happened out of the blue
  12.

    printing problem with Mutoh VJ-1204

    I'm having a printing issue with the Mutoh ValueJet 1204. There are red edges printing around the black. see attach file. What could be causing this? I have done a head clean three or four times.

  13. Mutoh VJ-1204 not printing magenta

    Thanks for the replies. We ended up having a repair man take a look at it. Air was getting in the tubes and the dampers needed to be replaced.

  14. Mutoh VJ-1204 not printing magenta

    Our Mutoh VJ-1204 is not printing magenta. I'm wondering if there is a clog somewhere. I noticed when I moved the print head carriage to the left there is no magenta ink in the tubes and I can see where some magenta has leaked at the base of the ink tube. There was also some magenta leakage on...

  15. having issues with Wasatch SoftRIP and OYO Tech Styler

    Lately we have been having some issues with Wasatch Soft RIP and the OYO tech styler negative printer. After I rip a .prn file for negative printing in Wasatch, I select print and it keeps disconnecting with the OYO tech styler. The tech styler will make a noise for a few seconds like its going...
See more
Top