• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Recent content by Imageray

  1. Do you laminate your plain vinyl lettering?

    Vinyl is tested to extreme to achieve its life estimate , they found years back that vinyl lasts longer in real life conditions and extended life expectancy, If you laminate solid vinyl it is a waste of money and material, and may even cause failure sooner as it may shrink on the vinyl if not...
  2.

    Mimaki jv33

    Could be the permanent chips, need renewing, I had issues with mine after a problem with head and suppliers didn’t know, replaced the pemanent ink chips on cartridges and bingo green lights a go go

  3. JV33 No print at all/No test print

    did the head Id, after ok the head id it goes into device construction error head memory error etc When switch off and on still same errors Then can only get in in service mode

  4. JV33 No print at all/No test print

    have had same issue, printer was printing then stopped, after trying to re start the LCD screen flashed then turned off, only able to turn on / off , got transistors tested and 2 replaced on main board, nothing, got new main PCB, then uploaded firmware, allowed me in service mode to access...

  5. Mimaki JV33 "Special Firmware"

    hi all, interesting read indeed, after trying to install a new unused 2nd hand generic print head which didnt work had to replace with old print head then to be faced with a line of red leds which in effect stop everything as you can't even load ink into the head. JV33 160 on version 5firmware...
See more
Top