Recent content by lowell_sign_design

Thanks.

So no one else has had a similar problem and had this fixed??? I highly doubt that.

I think I learned that trick in 96', first day on the job. :wink:

First off I have the sp-300 with the wasatich colorRip 2.2v and 6.9v firmware. I spent the better part of 12 hours taking apart my machine and cleaning the encoder strip, the strip sensor, the sensor on the cutter. Did the environment match. Did the print-cut auto alignment as well as the...

I was going to but I received this error message... Nevermind I was logged off somehow, Works now. I'm also really new to the forum, but i <3 :corndog:

just found a really neat tool for the shop. works really well and its super easy to setup. being a smaller shop i have no room for the giant panel saw and spending $1000 + isn't really possible in the budget. makes exceptionally straight cuts and makes my signs look fantastic...

i'm from ann arbor, michigan and i just had both print heads replaced on my sp300. i was very worried about getting a bad tech like i have in the past. andy beal from nazdar traveled to me and fixed my printer in a very reasonable and professional manner. i'd highly recommend him. his email...

the problem is the print head got left over the weekend after a print jammed and the print head failed to dock back on the caps. i've had the pump and the caps changed out last year so that's doesn't seem to be the problem. it won't print any colors on the print test or if it does they are...

Where can I get the Service Manual for this machine>? I thought I read somewhere that it was available in the forum. I think its just a problem with the print head and I'm going to take it apart myself, give it a soak and see if that helps.

Nothing but problems with Wensco. They don't know jack, the tech came over was on the phone with Roland every 5 minutes to have the Roland folks walk him through changing my ink pump. No thanks, trying to avoid that again if I can help it.

I am in the Ann Arbor/Ypsilanti area of Michigan... I have some serious issues with my Roland sp-300 and need to find a reliable tech in the area that knows what they are doing. The last two tech's I had check out my stuff were on the phone more times to Roland asking them how to do what they...

don't forget the other famous chris lowell... http://en.wikipedia.org/wiki/Chris_Lowell :cool:

I had a similar problem when I did a test print with oem ink this past summer. One look outside and the customer and I decided no way that will work. It turned out to be a big mess. I was wondering if they changed the formula for the inks or something because it seemed to not have that...

Names Chris Lowell, I live and work out of the Ann Arbor/Ypsilanti area. I've been in the sign industry for 13 years... Always was curious about decals and stickers since I was really young. My first experience with a plotter was a super old gerber system 15" in vocad in high school. After...