Recent content by manlyon

The i3200 head seems to have only 4 canals so I don't think the CJV200 has this printhead since it's a 8 colors...

Thank you for your feedbacks. The price of the head....:eek:

Hi, Does anyone run the new mimaki CJV200. I'm interested in this machine and would like to know many thinks :) - print quality : is there any grainyness in the print even in dual CMYK ? - are the light gradient very smooth in dual CMYK ? - does the vinyl curl 24h after print and cut with the...

Hi, I'm interested by your solution :)

Thank you. I did change the pump but not the motor as it works well when I launch a normal cleaning. By"self clean" I mean the operation that the printer does every 8 hours while it is off. During those "self cleans", most of the time the head move off the captop and come back without pump. The...

Hi, To keep update : I did a initiliziation off all the parameters in service mode and downgraded to the 2.60 firmware. The pump works during some self cleaning now :) I try to record the sound of the self cleaning every 8 hours and I noticed that the pump seems to activated a least one time on...

I would also clean the encoder strip (as the black patterns seem to follow the shape of the letter). I recently had this problem with magenta only. Cleaning the encoder strip has fixed it for me.

Hi, it could be maybe be used pinch rollers or a dirty grit roller. Or the "feed calibration" not setted accuratly (if the lenght is always too short ot too long).

From digiprint. OEM Roland and new for sure. I'm trying to redo most of the parameters (I will do a complete parameters initialization to see if It fix the problem in last resort) and I have always been a little confuse about the "flushing position" : is right that the good flushing position is...

Yes but the mainboard has been replaced in december 2022 and I'm almost sure that the pump didn't run during autocleaning with the previous mainboard since the problems with captop clogged or head goign bad quickly started in 2021 maybe 2020...

Thanks for your help. The battery was good (more than 3V) but I changed it yesterday just in case. Unfortunatly still no pump during auto cleaning. The mainboard, the servo board and the carriage board have been remplaced with news ones less than 2 years ago (in preventive ) so I don't think...

Even with brand new Roland ESL3 cartdriges, the pump is not activate during auto cleaning... Does anyone have a suggestion ? Why the pump doen't work during autocleaning (it's works well when I launch a cleaning) ?

I did have the same problem with draw 2019 and PDF from Canva. Using a print to pdf software (pdf creator in my case) fix the problem. So I open the canva PDF, print to pdf and open the new PDF (printed) in draw. Boring but it works.

Bonjour, J'ai le même problème. Avez-vous trouvé la solution ? Hi, I have the same problem. Have you find the solution?

I dont know about the SP300V but my SP300i used to do good auto cleaning when iddle. I could go for holidays for 2 or 3 weeks without problem. I own it since 2009... and I were in holidays every year since then.