Recent content by Mikesbales

I'm having a hard time finding a template for a 2002 Polaris Sportsman 400. I do not have the ATV here so I'm not able to take measurements from it. I've found templates for newer models, but can't seem to find one for a 2002. Anyone know where I can find one? Any help is appreciated.

Anyone know where I can get a template for the 2002 Polaris Sportsman 400? I can find templates for newer years but not the 2002. Any help would be appreciated.

Jesper, Thank you. I just printed 30 swatches of each color in the design and now it appears to be printing as it should. I guess a standard cleaning wasn't enough and it just needed to get some new ink through the heads. Thank you!!!

I just reloaded the image from the original file and still have the same issues. Swaped out the media and tried a different profile and still the same issue :(

Hi guys. My Roland tech is off this week so I'm hoping you can help me with something. Roland SP-300V is printing a gradient on the first few inches or so of every design I'm printing. In the attached image that should be a solid yellow. This just started yesterday evening and seems to happen on...

I've tried running this through FindMyFont without finding anything even close. Hoping someone here recognizes it. Thanks in advance.

Thanks guys. I wouldn't be able to fit both sides on a single length of material (its just a bit too narrow for that) so I just measured everything out and the second side is printing now and it appears to be a perfect match (fingers crossed). Thanks again!

Banners make up about 0.001% of my business but a regular customer wants a double sided banner (17" x 54") So when I print side #1 and flip over the material I can't seem to get them to line up (the top lines up perfect, the its just the one side will be too far left or right). My question is...

That the best disclaimer I've seen in a while lol.

Strange as it may sound that does help...a lot. I was able to run a font ID on that and found some similar fonts which are almost a perfect mach. Thank You!

Looking for the name of the two fonts circled in red in this image. Not able to run a FindMyFont scan due to the perspective. Doesn't have to be a perfect match, but something very similar would be helpful. Thanks in advance .

Vibration (Bold) is the closest I could find.

Great idea. Let me know when you actually start selling them and I may buy one. I would suggest offering an option that would allow for crossbeams to be added so that another shelf could be added for storage of larger pieces of material.

For a lot of the smaller stuff it would have to be the rotary cutter. Took me about six months of slicing stuff with an Xacto knife before I learned about them. It makes trimming application tape SO much easier.

Dang.... lol. Thanks for the advice. I think I'll hold off for now then.