Recent content by Nico Hendrickx

Link for download you see few post up from this.

No, dont work. Get no cummunication with the printer when I use PECK 5. Now I have PECK 7 and it works -> Rear switch ON --> Front switch Off.

Thx, now it works.

This screen, for 20min....

Do you know where I can get the Peck 6.50? The Peck 5 dont work at my VS300i.

Bud I need stil the Peck tool 6.5. if you looks further in manual. Do you know where i can find it?

The mainboard from my VS-300i was defective. I wanted to save all data before the mainboard could not be repaired. It has been repaired perfectly in the meantime and everything works fine now. But I would like to know how I can get the pecktool to work

It is for the Roland VS-300i. BN-20 was my old printer, where I use the Service app.

I try it. No succes. stil no communication.

Anyone know how I can change the color setting from Lk to WH on my VS-300i? I don't get that choice in the settings. I just did a headwash. There is no ink in the printer now.

The head has ink in the meantime, and the captop discoloured with ink. Yet I still get no ink on the vinyl. In the meantime I discovered that the mainboard is defective. It is to a repairer who will repair it.

At my BN-20 was the plastic clamps of the print head cables that were touching the metal casing. Or the contact surface where the drive belt meets the rollers that could use a little lubrication.

Hello, when I use the "peck tool" It have connection whit printer and it stay on " communication". What do I wrong?

Hello sir, can you send me a e-mail? nico_hendrickx@hotmail.com What I did: dampers and head are now ok. => working at other printer. When I disconnect the connector of the pipe on the damper, the ink drips from the pipe. With an "ink circulation" I see the metallic up and down in the pipe...

And transistors are also ok.