Recent content by nivag

Thanks guys, I have the heads out and soaking in fluid, I have been using an eye dropper to remove the ink in reverse and they are slowly getting cleanner and easier to pull fluid through, I just squeeze the the rubber top and place on the manifold (with a small piece of tube to connect the two)...

Thanks that gives me hope at least, what I’m planning to do is install new dampers with short tubes that sit up high on the machine, I will fill them with solvent and fit them on the dx4's, Leave it like this for a couple of weeks just unblocking the the tubes each day so the solvent can work...

Would taking them out and using an ultrasonic cleanner be of any benefit?

Unfortunately it was just left with cleanner in the capping station only, it has not been turned on yet. I was thinking that replacing the ink lines would be a good idea as well as the dampers, are the lines easy to replace? Does anyone have information that would help to do this, forewarned is...

Hi, I need to flush the heads and lines as this printer has been sitting for a year, my thinking is to get a refillable ink cart, fill it with cleanner and pull it though the lines (after removing from the damper), then replace the dampers and pull some cleaner though them though the head by...